Victron Energy Monitoring
SmartShunt - Smart Battery Shunt The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
Differences compared to BMV712 Battery Monitor • No programmable visual and audible alarm. • No programmable relay
Victron Connect
SmartShunt
300A / 500A / 1000A / 2000A
Supply voltage range
6.5 - 70 VDC
Current draw
< 1mA
Input voltage range, auxiliary battery
6.5 - 70 VDC
Battery capacity (Ah)
1 - 9999 Ah
Operating temperature range
-40 +50°C (-40 - 120°F)
Measures voltage of second battery, or temperature, or midpoint
Yes
Basic Shunt Wiring
Temperature measurement range
-20 +50°C
VE.Direct communication port
Yes
RESOLUTION & ACCURACY
Current Voltage
± 0.1A
± 0.01V ± 0.1 Ah ± 0.1% ± 1 min
Amp hours
State of charge (0 – 100%)
Time to go
Temperature (if optional temperature sensor connected)
± 1°C/°F (0 - 50°C or 30 - 120°F)
Accuracy of current measurement
± 0.4%
Offset
Less than 20 / 40 / 80 mA
Accuracy of voltage measurement
± 0.3%
INSTALLATION & DIMENSIONS
300 A: 44 x 120 x 44 mm 500A: 46 x 120 x 54 mm 1000A: 68 x 120 x 54 mm 2000A: 68 x 120 x 76 mm
Dimensions (H x W x D)
Wiring for use as DC meter Models: 500A, 1000A, 2000 A
Protection category
IP21
STANDARDS
Safety
EN 60335-1
EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3
Emission / Immunity
Automotive
EN 50498
Two cables with 1A fuse, for ‘+’ connection and starter battery or midpoint connection
Cables (included)
Temperature sensor
Optional (ASS000100000)
Veloris. The Battery Partner.
162
Made with FlippingBook interactive PDF creator