MPPT Solar Charge Controllers SmartSolar MPPT RS 450 SmartSolar MPPT RS 450|100 & 450|200 - Isolated 5.76 kW & 11.52 kW Solar Charge Controller with 450 V PV input Ultra-fast Maximum Power Point Tracking (MPPT) Solar Charge Controller The MPPT RS SmartSolar is a 48 V Solar charge controller with up to 450 VDC PV input and either 100 A, or 200 A output. It is used in on-grid and off-grid solar applications where maximum battery charging power is required. Multiple independent MPPT tracking inputs With multiple MPPT trackers, you can optimise your solar panel design for maximum performance for your specific location. Isolated PV connections for additional safety Full galvanic isolation between PV and battery connections provide additional overall system safety. Wide MPPT voltage range 65 – 450 VDC PV operating range, with a 120 VDC PV startup voltage. Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful charger weighs only 7.9 kg for the 100 A model. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. Display and Bluetooth The display reads battery, and controller parameters. The parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect. SmartSolar MPPT RS 450|100 PV Isolation resistance monitoring for peace of mind at higher voltages The MPPT RS continuously monitors the PV array and can detect if there are faults that reduce the isolation of the panels to unsafe levels. VE.Can and VE.Direct port For connection to a GX device for system monitoring, data logging, and remote firmware updates. VE.Can allows for up to 25 units to be connected together in parallel and synchronise their charging.
SmartSolar MPPT RS 450|100
I/O Connections Programmable Relay, temperature sensor, auxiliary, digital input and voltage sensor connections. The remote input can accept the Victron smallBMS, and other BMS with allow-to-charge signal.
Isolated SmartSolar MPPT RS
450|100
450|200
CHARGER
48 v
Battery voltage
100 A
200 A
Rated charge current Maximum charge power Charge voltage 'absorption’ Charge voltage 'float' Programmable voltage range
5.8kW at 57.6V
11.5 kW at 57.5 V
Default setting: 57.6 V (adjustable) Default setting: 55.2 V (adjustable) Minimum: 36 V Maximum: 60 V Multi-stage adaptive (adjustable)
Charge algorithm
Included
Battery temperature sensor
96 % 15 mA 450 V 120 V
Maximum efficiency Self-consumption
SOLAR
Maximum DC PV voltage
Start-up voltage
Configure and monitor with VictronConnect The built-in Bluetooth Smart connection allows for quick monitoring and settings adjustment. The built-in 30-day history shows individual performance of the separate MPPT trackers. Try the VictronConnect demo to see the full range of configuration and display options with sample data.
65 - 450V
MPPT operating voltage range Number of trackers Max. PV operational input current Max. PV short circuit current Max. DC output charging power Maximum PV array size per tracker PV Isolation fail level
2
4
16 A per tracker 20 A per tracker
4000 W per tracker 5760 W total
4000 W per tracker 11520 W total
7200 Wp (450 V x 20 A) (3)
100 kΩ
GENERAL
Synchronised Parallel Operation Programmable relay
Yes, up to 25 units with VE.Can
Yes
PV reverse polarity Output short circuit Over temperature
Protection
VE.Direct port, VE.Can port & Bluetooth (6)
Data communication Bluetooth frequency Bluetooth power
2402 – 2480 MHz
4dBm Yes, 2x
General purpose analogue/ digital in port Operating temperature range Humidity (non-condensing) Remote on-off
Yes
-40 to +60 °C (fan assisted cooling)
max 95 %
ENCLOSURE
steel, blue RAL 5012
Material & Colour Protection category Battery-connection
IP21
2x M8 bolts, 1x positive and 1x negative
4x M8 bolts, 2x positive and 2x negative
VRM Portal When the MPPT RS is connected to a GX device with internet connection, or the GlobalLink 520 with built in 4G connectivity, you can access our free remote monitoring website (VRM). This will display all your system data in a comprehensive graphical format. Alarms can be received by e-mail.
1 pair of male and female MC4 connectors per tracker
Power terminals PV input
7.9
13.7
Weight
487 x 434 x 146
Dimensions (H x W x D) in mm 440 x 313 x 126
Product Catalogue.
175
Made with FlippingBook interactive PDF creator