Fluke 771, 772 and 773 mA Process Clamp Meters
Recommended Accessories
Don’t break the loop on 4-20 mA signal measurements and save time with the Fluke 771, 772 and 773 Milliamp Process Clamp Meters Three year warranty, (one year provided on mA clamp assembly and cable) Use the Fluke 772 and 773 to: • Source 4-20 mA signals for testing control system I/O or I/Ps • Simulate 4-20 mA signals for testing control system I/O • Measure 4-20 mA signals with in-circuit measurement • Power a transmitter with the 24 V loop power supply • Automatically ramp and step change the 4-20 mA output for remote testing Use the Fluke 773 to: • Measure DC voltage to verify 24 V power supplies or voltage I/O signals • Source DC voltage to test voltage input devices • Scaled mA output signal enables a logging DMM (289) to record 4-20 mA signal without breaking the loop • mA in/out: simultaneously source a mA signal while measuring a mA signal with the clamp
TL220 SureGrip™ Industrial Test Lead Set See page 149
C550 Tool Bag See page 158
Fluke 771, 772 and 773 mA Process Clamp Meters pay for themselves • The more you use them the more money you save • Measuring 4-20 mA signals (five) times without operator intervention can pay for the 771 • Saving a trip back to shop to get a loop calibrator can pay for the price difference of the 772 • Saving a trip back to the shop for a voltage test source can pay for the price difference of the 773
Fluke 773
Fluke 772
Fluke 771
mA measure In circuit
mA measure w/jaw
Loop power 24 V
DCV source 0-10 V
DCV measure 0-30 V
Scaled mA output to mA input
mA source
mA sim
mA in/ out
● ● ●
— — — —
— —
— —
— —
— —
771 772 773
● ●
● ●
● ●
● ●
●
●
●
●
Resolution and range
Specifications Function
Accuracy
Notes
Measured by clamp
0 to 2099 mA
02% + 5 counts
771, 772, 773
mA measurement
210 mA to 1000 mA 1% + 5 counts
—
Measured in series with test jacks Maximum mA drive: 24 mA into 1,000 Ω Maximum voltage 50 V DC 2 mA maximum drive current
772 and 773
mA measurement
0 to 2400 mA
02% + 2 counts
772 and 773
mA source
0 to 2400 mA
02% + 2 counts
772 and 773
mA simulate
0 to 2400 mA
02% + 2 counts
Included Accessories Fluke 771: Soft Carrying Case, User Manual Fluke 772/773: Four AA Alkaline Batteries (installed), Soft Carrying Case, TL75 Test Leads, AC 72 Detachable Clip, TL940 Mini-hook Test Leads, Instruction Sheet, Hanging Tool with Hook and Loop Strap Ordering Information FLUKE-771 Milliamp Process Clamp Meter FLUKE-772 Milliamp Process Clamp Meter FLUKE-773 Milliamp Process Clamp Meter
773
Voltage source
0 to 10 00 V DC
02% + 2 counts
773
Voltage measure 0 to 30 00 V DC
02% + 2 counts —
771
772
773
Battery
Two 15 V, Alkaline, IEC LR6
Four 1 5 V, Alkaline, IEC LR6
Working hours Size (H×W×L)
40 hours typical
12 hours @ 12 mA source into 500 ohms
59 mm × 38 mm × 212 mm
437 mm × 70 mm × 2462 mm
Weight
260 g
410 g
Operating temperature
-10°C to 50ºC
IP rating
IP 40
C ontact your local distributor for price and availability. fluke.co/wtb
106
Process Calibration Tools
Loop Calibration
Made with FlippingBook Learn more on our blog