Fluke 715, 707, and 705 Loop Calibrators Complete family of Volt/mA calibrators
Recommended Accessories
Fluke 715 Volt/mA Calibrator • Source voltage to 200 mV or 20 V • Measure loop current (0 to 20 mA, 4-20 mA) signals with 001% accuracy and 1 µA resolution • Measure voltage output process signals from PLCs, transmitters • Source or simulate 4-20 mA loop current • 24 V loop supply with simultaneous current measurement • Ramp and Step Ramp output functions
TL28A Heavy Duty Test Lead Set See page 161
TL220 SureGrip™ Industrial
Test Lead Set See page 149
• Three year warranty Fluke 707 and 705
• Innovative output adjustment dial on 707 provides 1 µA and 100 µA resolution and one-hand operation • Large display and simple interface for ease of use • Simultaneous mA and% readout for quick, easy interpretation of readings
C550 Tool Bag See page 158
Fluke 715
Fluke 705
• mA accuracy of 0015% on the Fluke 707 and 002% on the 705
• HART mode on 707 connects 250 ohm resistor in series with 24 V loop for compatibility with HART ® communicators • Push button 25% steps for fast, easy linearity checks • “Span Check” for fast confirmation of zero and span • Selectable slow and fast linear step ramp provide ramping outputs for valve slewing, remote testing and loop functional tests • 24 V internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM • 0 to 20 mA or 4-20 mA default start up modes • Three year warranty
Fluke 707
705/707
715
Voltage measurement Range
0 V to 28 V
0 mV to 200 mV / 0 V to 25 V
Resolution
1 mV
10 µV / 1 mV
705: 0025% Rdg + 1 LSD 707: 0015% Rdg + 2 LSD
Accuracy
001% Rdg + 2 LSD
Current measurement Range
0 mA to 24 mA
0 mA to 24 mA
Resolution
0001 mA
0001 mA
705: 002% Rdg + 2 LSD 707: 0015% Rdg + 2 LSD
Accuracy
001% + 2 LSD
Current sourcing Range
0 mA to 20 mA or 4 mA to 20 mA 0 mA to 20 mA or 4 mA to 20 mA
Included Accessories Fluke 705/707: Test Leads, AC175 Alligator Clips, Single 9V Alkaline Battery, Instruction Sheet Fluke 715: Yellow Holster (H80M excl TPAK), Test Leads and AC175 Alligator Clips, Single 9V Alkaline Battery, Instruction Sheet Ordering Information FLUKE-705 Loop Calibrator FLUKE-707 Loop Calibrator FLUKE-715 Volt/mA Calibrator
705: 0025% Rdg + 2 LSD 707: 0015% Rdg + 2 LSD 705: 1000 Ω @ 24 mA 707: 1200 Ω @ 24 mA
Accuracy
001% Rdg + 2 LSD
Drive capability
1000 Ω @ 24 mA
Loop power while measuring mA Voltage sourcing
24 V
-
0 mV to 200 mV or 0 V to 20 V
Display current and% of span Auto step, auto ramp
Yes
mA or%
Yes Yes
Span Check Battery life
18 hours typical, at 12 mA
C ontact your local distributor for price and availability. fluke.co/wtb
108
Process Calibration Tools
Loop Calibration
Made with FlippingBook Learn more on our blog