PORTABLE OSCILLOSCOPE ACCESSORIES
VPS420-X High Working Voltage Ruggedised Probe • Set includes: VPS420-X 100:1, 150 MHz • X = Red, Blue, Grey or Green • Hook clip for Probe tip (Black) • Large jaw probe clip (Black) • Reference lead with 4 mm Banana plug • Large jaw alligator clip for 4 mm banana plug (Black)
PM9091 Set of 3× Coaxial Cables with BNC Connectors • Length: 15 m each • Impedance: 50 ohm • Colour: 2× Red, 2× Black, 2× Grey • Max signal voltage: 300 Vrms • Max voltage to ground: CAT III 600 Vrms per IEC/EN61010-031
BB120-II Adapter BNC (Female) to Shielded Banana Jack • Set of 2 • Max signal voltage: CAT III 300 Vrms per IEC/EN61010 • Max voltage to ground: CAT III 600 Vrms per IEC/EN61010
TRM50 Coaxial Feed-through BNC (Male) to BNC (female) Cable Terminator • Set of 2 • Impedance: 50 ohm • Max voltage over ground: CAT III 1000 V • Max power 1 W
PM9092 Set of Coaxial Cables with BNC Connectors • Length: 05 m each • Impedance: 50 ohm • Colour: 1× Red, 1× Black, 1× Grey • Max signal voltage: 300 Vrms • Max voltage to ground: 600 Vrms CAT III per IEC/ EN61010-031
AS400 Probe Accessory Extension Set For VPS400 Series Probes • CAT III 1000 V/CAT IV 600 V • Reference lead w/ 4 mm plug (Blk) 60 cm • Reference lead with hook clip (Blk) 22 cm • Large jaw probe clip (black) • CAT II 1000 V • 2 mm test probe for probe tip (1×, black) • 4 mm test probe for probe tip (1×, black)
PM9093 Adapter BNC (Male) to Dual BNC (Female) in T model (6) • Colour: 2× Black • Max signal voltage: CAT III 300 Vrms per IEC/EN61010 • Max voltage to ground: CAT III 600 Vrms per IEC/EN61010
BHT190 Bus Health Test Break-out Adapter Set • Board with M12 connectors (male to female, 5 pins) • DB-9 connectors (male to female, 9 pins + shield) • RJ-45 connector, with short patch cable providing male to female interconnection (8 pins)
RS400 Probe Replacement Set For VPS400 Series Probes and VPS210 Series Probes • CAT III 1000 V/CAT IV 600 V • 1× Probe hook clip (black) • Ground lead w/ mini alligator clip • 2× Insulation sleeve (black) • CAT II 30 V • 2× Ground spring (black)
PM9081 Adapter BNC (Female) to Dual Banana Jack • Colour: 2× Red, 2× Black • Max signal voltage: CAT III 600 Vrms per IEC/EN61010 • Max voltage to ground: CAT III 600 Vrms / CAT II 1000 Vrms per IEC/ EN61010
CS20MA Current Shunt for AC and DC measurements on 4 to 20mA Control Loops • Sensitivity: 10 mV/mA • Shunt resistance: 10 ohm • Bandwidth: >10 kHz • Max voltage to ground: CAT III 30 Vrms per EN/IEC 61010
RS500 Probe Replacement Set For VPS510 Series Probes • CAT II 300 V • 1× hook clip (black) • 1× ground lead with mini alligator clip • 2× insulation sleeves for probe’s ground contact (black) • 1× BNC to probe tip adapter (black) • 2× ground browsers (black) • 1× insulated mini screwdriver, for probe adjustment purposes
PM9082 Adapter BNC (Male) to Dual Banana Jack • Colour: 2× red, 2× black • Max signal voltage: CAT III 600 Vrms per IEC/EN61010 • Max voltage to ground: CAT III 600 Vrms /CAT II 1000 V per IEC/ EN61010
EBC290 External Charger For Fluke 120B and 190 Series II ScopeMeter ® Oscilloscope • Charging time (BP291): five hours, giving an operating time of up to seven hours • DC input voltage: 15 V to 23 V, 714 mA nom (DC input from BC190: 178 V / 084 A max)
TP920 Test Probe Adapter Set Suited for STL120 Test Leads (STL120-III, not compatible), TL71, TL75 & TL76 Test Leads • Rated for 3 A max
HC120 Hook Clips • Colour: 1× red, 1× grey • Max voltage: CAT III 600 Vrms per IEC 1010-2-031 • Nickel plated steel
fluke co/accessories
Fluke Accessories
163
Made with FlippingBook Learn more on our blog