FEATURED COPPER CABLE TEST SOLUTIONS
Intellitone Pro
Micro- Mapper
MS2-100 MS2-100-IE
MS-POE MS-POE-IE
LIQ-100 LIQ-100-IE
Pro 3000
TS100
Port Location ID Digital toning
3
3
3
3
Analog toning
3
3
3
3
3
3
3
Switch presence
3
3
3
3
Identify switch name, port ID and VLAN
3
VDV service detection
3
3
Cable Verification Cable wiremap
Graphical
Graphical
Graphical
3
3
Cable length
3
3
3
3
Qualified cabling speed (10/100/1000/10G)
3
Identify NBASE-T Capability
3
3
Identify PoE Capability
3
3
Cable Troubleshooting Identify open/short
3
3
3
3
3
3
3
Distance to open/short
3
3
3
3
Identify crosstalk fault
3
Identify impedance fault
3
MicroScanner™ PoE • PoE Switch Verification – Determine if a switch port can provide enough power by reporting PoE class (0-8). • Powered Pairs – Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++). • Active Switch Detection - Determine if a cable is connected to a switch port and port speed up to 10G. • Cable Testing – Identify any shorted, open or crossed wires at both ends, length ofeach pair, and send tones to find cables. • Validate and troubleshoot your Industrial Ethernet copper cabling • PoE Injector verification - Display injector voltage level • IE model tests common connector types including RJ11, RJ45, Coax, and Industrial Ethernet connector types (M12X, M12D, an M8D) Search for: MS-POE, MS-POE-IE, MS-POE-KIT
MS-POE-KIT
Fluke Networks
180
Made with FlippingBook Learn more on our blog