Fluke 1770 Series Power Quality Analysers
Recommended Accessories
Voltage inputs Number of inputs
4 inputs, 3 phases and neutral referenced to PE (5 connectors)
Measurement category Maximum input voltage
1000 V CAT III / 600 V CAT IV
1000 V rms / 1000 V DC (1700 Vpk)
i17XX-FLEX6KIP IP65 iFlex ® 6000 A 90 cm Current Probes (individual, 3pk or 4pk) See page 165
I400S AC Current Clamp See page 153
Wye and single phase: variable (50 V – 1000 V) Delta: Variable (100 V – 1000 V) IEC 61000-4-30 Class A compliance for the nominal voltages (V din ) 100 V – 690 V
Nominal voltage range
Input impedance
10 MΩ between P-P and P-N, 5 MΩ between P-PE and N-PE DC to 30 kHz for PQ measurements, excluding transients
Bandwidth Resolution
24-bit synchronous sampling
Sampling frequency
80 kS/s at 50/60 Hz
Scaling
1:1, variable for use of potential transformers
i40s-EL/3pk 40 A Clamp-on Current Transformer (individual or 3pk) See page 165
80I-2010S/3PK 2000 A AC/DC Current Clamp (individual or 3pk) See page 166
Voltage transients Measurement range
±8 kV
1775: 1 MS/s 1777: 1 MS/s, 20 MS/s
Sampling rate
Bandwidth
DC to 1 MHz
Trigger
Adjustable trigger level Triggers on high-frequency components >1 5 kHz
Resolution
14-bit synchronous sampling
Current inputs Number of inputs
Antenna Cable Antenna cable 5 m
177X WiFi/BLE Wi-Fi/BLE Module
4 inputs 3 phases and Neutral, range selected automatically to attached sensor
1 A to 1500 A with i17XX-FLEX1500 12 1 A to 1500 A with i17XX-FLEX1500 24 3 A to 3000 A with i17XX-FLEX3000 24 6 A to 6000 A with i17XX-FLEX6000 36 40 mA to 40 A with clamp i40s-EL 4 A to 400 A with clamp i400s-EL 20 A to 2000 A with 80i-2010-EL clamp
AC
Included Accessories 17XX iFlex ® 1500 A 24 IN,
Range
Voltage Test Lead 3-Phase+N, 4x AC285 Black Alligator Clips, 1x AC285 Green Alligator Clip, USB-C Cable, Line Cord, FLK- 17XX 018 M Test Lead Set, Green Test Lead, Cable Marker Set, WiFi/BLE Module (1775, 1777), Magnet Probe (1775, 1777), Hanger Kit (1775, 1777), Black Soft Case (1775), Hardcase (1777) PQ400: Enclosure, 4× Male- Male Cable 2 m for iFlex ® Current Probes, Cable Marker Set 3P+N+PE, Cable Ties, Instruction Sheet Ordering Information FLUKE-1773 Three-Phase Power Quality Analyser w/ Accessories FLUKE- 1773/BASIC Three-Phase Power Quality Analyser Only FLUKE-1775 Three-Phase Power Quality Analyser w/ Accessories FLUKE- 1775/BASIC Three-Phase Power Quality Analyser Only FLUKE-1777 Three-Phase Power Quality Analyser w/ Accessories FLUKE- 1777/BASIC Three-Phase Power Quality Analyser Only
DC
Bandwidth Resolution
DC to 30 kHz
24-bit synchronous sampling
Sampling frequency
80 kS/s at 50/60 Hz
Scaling
1:1, variable
Clamp: 50 mV / 500 mV rms; CF 2 8 Rogowski Coil: 15 mV / 150 mV rms at 50 Hz, 18 mV / 180 mV rms at 60 Hz; CF 4 all at nominal probe range
Input voltage
Input impedance
11 kΩ
Aux inputs Wired connection with 17xx-AUX adapter Number of inputs
2
Input range
Direct: 0 V DC to ±10 V DC 0 V to 1000 V DC
Input impedance
Direct: 292 MΩ
Fluke PQ400 Electrical Measurement Window
Compliance without compromise Safety without sacrifice The Fluke PQ400 Electrical Measurement Window enables the connection of three phase measurement equipment to energised panels, without the need to open the panel door, or wear supplemental personal protective equipment (PPE) • Permanently connected voltage and current sensors located inside the electrical panel allow you to make power quality and energy measurements using the external access points without opening the panel door • Automatic probe detection for Fluke 1740 and 1730 series power quality and energy loggers and compatible clamps • Full 360 degree rotation allows the PQ400 window to be oriented in any direction • Simple installation using a step drill bit and electro- hydraulic hole punch • IP67 with cover closed, IP50 with cover opened and all connectors attached • Five year warranty
FLUKE- PQ400
Power Quality Window
Fluke PQ400
C ontact your local distributor for price and availability. fluke.co/wtb
fluke co/powerquality
Power Quality
89
Made with FlippingBook Learn more on our blog