COMOT-AZ
Collet chuck ■ With axial pull-down ■ For axial stops front/center with air system control ■ Adaptation options
Versatile collet chuck - pull-back
Application/customer bene ts • Highest manufacturing precision – for exact dimensional accuracy and consistent repea- tability • Stable clamping force thanks to axial pull-down against workpiece stop (front/center) – for low-vibration machining • Sealed against the ingress of chips and cooling lubricant • Wide range of standard collets available • Use of attachment mandrels from the “Connect” series • Use of high-precision collets Technical features • With axial pull-down • With radial fine adjustment for aligning the clamping device on the flange (4x 90°) prepared for air system control (central or frontal) • Manual lubrication Standard equipment Ordering example Collet chuck COMOT-AZ-65-Z170 with bolts with basic workstop (central M12) with protection sleeve (with through-hole)
Application Examples
Collet chuck COMOT-AZ with standard collet for O.D. Clamping
Vulcanized standard collet
Collet chuck COMOT-AZ* with extension mandrel EMX-F-CO „Connect“ for I.D. Clamping
Connect chuck (quick-change, no manual alignment required)
*For the mandrels please see the page of the mandrels EMX-F-CO
Collet chuck COMOT-AZ with premium adapter PA* for high-precision O.D. Clamping
Clamping with slotted high-precision collet
*For the premium adapters please see the page of PA-Comot
4 SMW-AUTOBLOK
Made with FlippingBook Publishing Software