COMOT-NZ
Collet chuck
■ Without axial pull-down ■ For axial stops front/center with air system control
Position-neutral collet chuck - deadlength
Application/customer bene ts • Highest manufacturing precision – for exact dimensional accuracy and consistent repeatability • Position-neutral clamping – for tension-free transfer between main and counter spindle • Sealed against the ingress of chips and cooling lubricant • Wide range of standard collets available • Can be used with front/central stop or with free passage Technical features • Without axial pull-down • With radial fine adjustment for aligning the clamping device on the flange (4x 90°) • Prepared for air system control (central or frontal) • Manual lubrication Standard equipment Ordering example Collet chuck COMOT-NZ-65-Z170 with bolts with basic workstop (central M12) with protection sleeve (with free through-hole)
Application Examples
COMOT-NZ 65 collet chuck with collet
Clamping with standard collet
6 SMW-AUTOBLOK
Made with FlippingBook Publishing Software