INJECTION MOULDED PALLETS (MODEL : OW-1111) Injection Molded, Recycle PPCP, Perforated Double Deck, full perimeter 6-Runner, 4-way entry, non-reversible pallet Load Bearing Capacity Static Load : on ground floor Uniformly Distributed Load (UDL) : 2000 kg. for light weight products; Dynamic Load UDL 1000 kg; for light weight products. Racking - not applicable. MHE & HPT: Wider HPT with width over fork of 685 mm recommended for floor use. Forklift Width over Fork Distance should be ideally 700mm.
• Stackable Pallet in Sea Freight containers & floor use for light weight products. • Stretch Wrap ribs - add tamper evidence to stretch wrap. You can't remove & re-fit stretch wrap, Ribs would tear it while removing. • Safety Belt hook - Use Strapping belt to make NON-UDL load as UDL load, enhance safety of your product. Enhance Stacking stability during prolonged storage & multiple handling. • PP Strapping Slot - We recommend low cost PP strapping for small cartons crates, small PET/Glass bottles. Separators & top cap available on request. The in-built provision of PP strapping slot enables multiple handling of these light weight manifold numbers. Small objects do not fall-off the pallet during handling or with little jerk or light hit. • Top Deck perforation designed anti-slip for products & pallet do not slip off from forks due to special design anti-skid grommets.
OW-1111
Add to storage density with Stacking Frames
A good idea to increase storage density over a limited storage footprint. Stacking frames should be used when the load on the pallet above cannot impact the goods placed on the lower pallet. The frame takes the load. Stacking frames can be custom built to suit your specific needs, thanks to built in holes in the pallet - an exclusive design feature from Nilkamal.
Stretch wrap ribs to show evidence of tampering. The construction of these ribs will tear the stretch wrap film if is attempted to remove & re-wind
Slot for PP Straps : When a number of small goods are loaded on, strapping is useful to secure them against
Safety Edge - (Optional) as per European standards. Preventive measure against product slippage if pallets tilt
Extra Features Perforated : Top deck to prevent skidding and slippage of stored goods. Also specially designed anti-skid drommets.
Hole for stacking frame : (Optional) A Specially designed hole holds a stacking frame where the load does not impact the contents of the pallet below.
Safety Belt hook - Use Strapping belt to distribute load uniformly, for safety of your goods. Enhance stacking stability during prolonged storage.
Racking Load (kg.) Standard PSS
1100 X 1100 X 120 1000 X 1000 X 120 1300 X 1100 X 125 1200 X 1100 X 125 1200 X 1000 X 120 Dimensions (L x B X H ) IN MM.
800-1100 800-1000 800-1000 800-1000 800-1000 Dynamic Load (kg.)
Drive-in Rack Load (Kg.)
Static Load (kg.)
Model
720 660 880 880 700
200 170 320 320 200
70 90 75 75 90
720 660 720 720 700
200 170 190 190 200
70 90 75 75 90
N.A. N.A. N.A. N.A. N.A.
N.A. N.A. N.A. N.A. N.A.
2000 2000 2000 2000 2000
OW 1111 OW 1010 OW 1311 OW 1211 OW 1210
40 52
For instant response mail us at : storagesolutions@nilkamal.com
Made with FlippingBook flipbook maker