AUTOMOTIVE ACCESSORIES
TLK281 SureGrip ™ Automotive Test Lead Kit
BP880 BNC to Female Double Stacking Banana Plug
TP81/TP82 Insulation Piercing Clip Set Two stainless steel probes (red, black) pierce insulation on 14, 16 and 18 gauge wire. Needle depth can be controlled to minimise insulation damage. Essential for use under hood or under dash. Can be used on fuel injectors or sensors while providing complete insulation to grounding. Probe connects to a banana jack that accepts all digital multimeter and banana jack leads (such as the TL224 SureGrip™ Insulated Test Leads). • TP81 has non-rotating 4 mm banana jack to prevent leads from tangling • Rated to 60 V DC • TP82 is for use with test leads with 2 mm probes
Converts a BNC scope lead to a dual banana plug for connection to a digital multimeter to provide hands-free testing in controlled voltage environments. • Voltage range: up to 500 V AC RMS • 4 mm banana plug is nickel-plated, beryllium copper for low contact resistance
Sharp stainless steel probes can be used to contact the wire conductor or pinpoint tests on a circuit or relay while the large-jaw alligator clips ensure a good ground on the engine or connection to battery terminals. Rated to 60 V DC. Kit includes: • TP81 Insulation Piercing Clip Set • TL224 SureGrip™ Insulated Test Leads • TP220 SureGrip™ Industrial Test Probes • AC220 SureGrip™ Alligator Clips • AC285 SureGrip™ Alligator Clips • Soft case
BP881 BNC to Male Double Stacking Banana Easily connects a digital multimeter to a BNC patch cord to provide hands- free testing in controlled voltage environments. This adapter connects accessories that have a male BNC output. • Voltage range: up to 500 V AC RMS • 4 mm banana plug is nickel-plated, beryllium copper for low contact resistance
TLK282 SureGrip ™ Deluxe Automotive Test Lead Kit
TP88 Rigid Back Probe Pins Better than a test probe alone, these rigid back probe pins easily pass between a weather-pack seal and wire. A sharp point ensures good contact to the electrical connector, and insulation protects the pin from shorting to other wires. Rated to 60 V DC • Slides onto 2 mm test probes • Probe length: 51 mm
This kit includes everything in the TLK281 Kit plus a few extras. The back probe pins slide past weather- pack connectors on fuel injectors, TPS, and MAP sensors. A hook probe with plunger actuation allows quick connection to pins or exposed conductors. Rated to 60 V DC. Kit includes: • TP81 Insulation Piercing Clip Set • TP40 Automotive Back Probe Pins (five) • TL224 SureGrip™ Insulated Test Leads • TP220 SureGrip™ Industrial Test Probes • AC220 SureGrip™ Alligator Clips • AC285 SureGrip™ Alligator Clips • AC280 SureGrip™ Hook Clips • Soft Case TP40 Automotive Back Probe Pins Flexible and formable 31-75 mm pins provide an easy connection past weather-pack seals to connector conductors. These five pins are a must-have for fuel injectors, TPS, and MAP sensors, as well as for any under- hood or under-vehicle connector with weather-pack seals. • 4 mm banana jack accepts digital multimeter and banana jack leads • Easily connects to modular leads • Rated to 60 V DC
TL28A Automotive Test Lead Set Silicone-insulated test leads (red, black) with large, solid copper alligator clips with 12.7 mm opening and serrated teeth. • 1.5 m test leads • Safety rating: 30 V, 10 A
RPM80 Inductive Pick-Up/ External Trigger • Provides RPM measurement capability when clipped on spark plug wire • For use with Fluke 88 Series and 78 Series Digital Multimeters.
TL82 Automotive Pin and Socket Adapter Set This collection of male and female adapters provides firm connection to pin-and-socket connectors. Rated to 60 V DC. Set includes: • Two retractable shrouded test leads (red, black) 1.2 m • Eight pin-and-socket adapters with flexible tips (red, black): - Size 22 contact 0.76 mm, rated 5 A - Size 20 contact 1.02 mm, rated 7.5 A - Size 16 contact 1.60 mm, rated 13 A - Size 12 contact 2.36 mm, rated 23 A
fluke.co/accessories
Fluke Accessories
179
Made with FlippingBook Learn more on our blog