Fluke ST240+ RCD Socket Tester with Beeper
Quickly check for common wiring faults and RCD operation • Simple operation – Plug into a socket to quickly verify correct wiring or identify common wiring problems in both standard and RCD outlets with the bright, easy-to-see LED lights • Know more faster with the handy chart - quickly identify one of six wiring conditions for the outlet • Verify RCD outlets - with an integrated RCD test, you can feel secure knowing that your RCD equipped outlets are functioning properly • Two year warranty Fluke ST240+ Socket Tester with RCD The Fluke ST240+ RCD Socket Tester checks that each wire in the outlet is properly connected to the building's electrical system. Via the bright LEDs and included chart, you can quickly and easily verify the wiring of an outlet. Being able to identify several common wiring errors, including reversed live and neutral wires and an Earth fault, the Fluke ST240+ will give you confidence on your next job. Audible alert helps you work faster and safer The Fluke ST240+ also gives you a unique audible alert anytime voltage is detected. Save time when trying to identify which circuit breaker is connected to which outlet. Just plug the socket tester in, walk to the circuit breaker panel, and listen for the beeper to turn off – or on – as you flip the breakers. Once it does, you’ve found the correct breaker. Time – and trips – saved. When switched on, the integrated beeper can also alert you to hazardous voltage at the outlet, even if the wiring is incorrect. Working in an office, hospital or other location where you don’t want to interrupt others? No problem – the beeper can be switched off. One-button RCD tests The included RCD test button on the Fluke ST240+ Socket Tester allows you to also test the operation of RCD outlets. With a single push, the ST240+ can verify the operation of your RCD equipped outlet. If the RCD trips as expected, perfect, you can move on. If not, it’s time to take a closer look. Fast visual identification of all 6 wiring conditions The Fluke ST240+ has three bright, easy-to-see LED indictors. This lets you see one of six wiring scenarios at a glance: • Correct installation • Earth fault • Neutral fault • Live fault
Recommended Accessories
1AC-II VoltAlert™ AC Non-Contact Voltage Testers See page 39
PRV240 Proving Unit See page 24
Fluke ST240+
• Live/Neutral reversed • Live/Earth reversed
Functions
ST240+
Included Accessories Instruction Sheet Ordering Information ST240+/ ANZ
Rated Operating Voltage
230 V ac +/-10% at 4mA
Wattage
0.92 W typical
Frequency
50 Hz
Integrated, switchable beeper
Yes, 60 db
Socket Tester with LEDs, RCD Test Button, Beeper; ANZ Version
RCD Test
Yes
Indicator Lights Safety Rating
1 red, 2 green LEDs
300 V CAT II
C ontact your local distributor for price and availability. fluke.co/wtb
fluke.co/basictesters
Electrical Testers
41
Made with FlippingBook Learn more on our blog