NEW
Fluke FEV300 Electric Vehicle Charging Station Adapter
Test and troubleshoot the functionality and safety of electric vehicle power supply equipment The NEW Fluke FEV300 Electric Vehicle Charging Station Test Adapter simulates the presence of an electric vehicle, allowing you to conduct safety and functionality tests in combination with appropriate test instruments such as installation testers (for example the Fluke 1664 FC Installation Multifunction Tester), digital multimeters (such as the Fluke 87V MAX Industrial Multimeter) or oscilloscopes (such as the Fluke 120B Series Industrial ScopeMeter ® ) With the FEV300 Adapter Kit, charging stations can be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722 The Fluke FEV300 is designed for electricians and technicians that install electric vehicle charging stations to verify the station is working properly after installation, during periodic maintenance, or when troubleshooting • Suitable for AC charging stations with mode 3 and connector Type 1 and Type 2 • Enables you to test in a safer manner compliant to the required standard Eg AS3000 • Use the PE Pre-Test safety feature to test the PE conductor for dangerous voltage against earth • Use the CP control pilot for vehicle simulation and PP Proximity Pilot for cable simulation • Includes measuring terminals L1, L2, L3, N and PE to connect a test device such as an installation tester to perform safety and functional tests • IP54 rating for limited dust ingress and water splash protection • Three year warranty
Recommended Accessories
Type 1 Connector Type 1 plug vehicle connector See page 167
Recommended Kits
Bundle & Save
Fluke FEV300 with Type 1 and 2 Connector
Fluke FEV300 with Type 2 Connector
Fluke FEV300 NEW
Fluke FEV300 with 1664 FC For more details see page 189
Specifcations
FEV300
Up to 250 V (single phase system) / up to 480 V (three phase system), 50/60 Hz, max 10 A AC charging mode 3, suitable to IEC 62196-2 type 2 socket outlet or fixed cable with vehicle connector (type 2, 7P three-phase) AC charging mode 3, suitable to IEC 62196-2 type 1 or SAE J1772 with vehicle connector (type 1, 5P single-phase)
Input voltage
EV connector (Type 2)
EV connector (Type 1)
Operating temperature Storage temperature Operating humidity range
-20°C to 40°C -20°C to 50°C
Included Accessories FLK-FEV300/TY2 & TY1: FEV300 Type 2 & Type 1 Connector, Soft Carrying Case, User Manual FLK-FEV300/TY2: FEV300 Type 2 Connector, Soft Carrying Case, User Manual FLK-FEV300/Kit: FEV300 Type 2 Connector, Soft Carrying Case, User Manual Ordering Information FLK- FEV300/TY1 & TY2 Test Adapter w/ Type 1 & 2 Connector FLK- FEV300/TY2 Test Adapter w/ Type 2 Connector FLK- FEV300/Kit Test Adapter w/ 1664 FC
10% to 85% relative humidity non-condensing
Storage relative humidity
0% to 85% non-condensing
Dimensions (H × W × D)
Approx 220 mm x 110 mm x 45 mm without cable assembly
Weight
Approx 2 kg
IEC 61010-1, Pollution Degree 2 IEC 61010-2-030
Safety standards
Measurement category
CAT II 250 V
IP protection class
IP54
m l ▼
Work in the eMobility and EVSE solutions Industry? Visit us to learn how Fluke tools can help with eMobility and EVSE solutions
Government, university, and healthcare
Single-home residential
Multi-unit dwelling
Highway transit
blic commercial parking
Charger
C ontact your local distributor for price and availability. fluke.co/wtb
fluke.co/ emobility
Panel
Back-up battery system (For Fast DC systems only)
Rectifier (For Fast DC systems only)
Utility distribution
EVSE Technician Focus: • Lead preventative maintenance • Troubleshooting
Job needs:
Transformer
l Digital multimeter l Clamp meter l Oscillpscope
fluke.co/solar-tools
Renewable Energy
77
• Monitoring • Installation
Insulation and power quality
Temperature/Thermal Battery analyzer ▼ Earth ground Insulated hand tools
Made with FlippingBook Learn more on our blog