Inflation Cycle indicator
S Mode Operation button
1
5
8
7
1
Battery Indicator *Note: Not all VenaFlow Elite Systems contain a battery
Patient Compliance counter
2
6
6
2
Patient Compliance counter reset push button
Single/Dual Leg operation indicator
3
7
ON/OFF/RESET push button
S Mode Operation indicator
3
5
4
8
4
Symbol Definitions
See VenaFlow Elite System operator’s manual
Power on/off button and alarm reset
Tube alarm
Dual calf/thigh
S Mode Operation
Call for service
Battery
Single calf/thigh
Inflation cycle indication (Bars indicate cuffs are inflating)
Compliance monitor reset
Lock mode
Dual foot
Visual and audio compliance alarm enabled
C
Visual only compliance alarm enabled
Single foot
Bed hanger release
1. Set up Pump
Graphical display
Pump indicator lights (green = on, flashing red = alarm)
• Press bed hanger release on the back of the pump and gently pull out bed hanger hook to the desired width. • Connect tubing to the pump. Plug pump into electrical outlet.
Telescoping bed hanger hook
2. Apply Cuff
• The VenaFlow Elite system will automatically detect the type of cuff and the number of cuffs attached and apply appropriate pressures. Cuffs must be attached prior to powering on the service. • Be sure to secure cuff straps snug but not tight. When using the calf cuff and thigh cuff, rotation of the aircell on the leg does not affect performance of the system.**
Calf or Thigh Cuff: For varied patient sizes, trim for proper, snug fit. • Apply cuff snugly with the tube pointed toward the foot. Aircell can be orientated to patient and nursing preference (posterior, lateral, anterior, or medial).**
Foot Cuff: • Apply foot cuff snugly with the aircell centered on bottom of foot and with the tube pointed to the left. Foot cuffs are only for use in standard rapid mode.
Made with FlippingBook - PDF hosting