Horizontal joints in face layer boards to be backed by Gypframe GFS1 Fixing Strap and treated in accordance with Gyproc Paper Joint Tape method. Gyproc DryWall screws installed at 300mm centres (200mm at external corners) Gyproc DryWall screws must maintain a minimum 10mm penetration through metal framing components. Insulation components Insulation specification required in stud cavity: 50mm Isover Acoustic Roll Isover Acoustic Roll insulation fixed inside head of GypWall stud cavity with lengths of Gypframe GA1 Angle or timber battens. Finishing 2mm Gyproc Skimcoat plaster (or Carlite Finish ) applied in accordance with Gypsum Industries current recommendations. Or 1 coat of Gyproc Drywall Primer prior to direct decoration (applied as soon as possible after board fixing is completed. Qualifications All materials unless otherwise indicated shall be supplied by Gypsum Industries, and shall be installed in accordance with their current published instructions and generally in accordance with all relevant Standards. Systems installed in full accordance with Gyproc’s recommendations comprising of genuine Gyproc and Isover branded components qualify for the SpecSure lifetime system warranty.
Health & Safety Ensure that suitable personal protection is worn when handling Gyproc and Isover products/systems. All relevant Health and Safety Legislation and Guidelines must be followed. The relevant Material Safety Data Sheets must be referred to prior to specifying, handling or installing Gyproc & Isover products and systems. Installation For full installation assistance refer to Gyproc Systems Solutions and Installation Guide literature which is available at www.gyproc.ie. Alternatively contact the Technical Service department at 1800 744480. Full specification, detailing and site support can be offered for your project specific
requirements. Manufacturer Gypsum Industries, Unit 14, Park West, Dublin 12, Ireland
Made with FlippingBook - professional solution for displaying marketing and sales documents online