1.4 Submittals A. Submit under provisions of Section 01 30 00 - Administrative Requirements. B. Product Data: Manufacturer's data sheets on each product to be used, including: 1. Preparation instructions and recommendations. 2. Storage and handling requirements and recommendations. 3. Installation methods. C. Samples: For each product specified, one sample representing actual product color, size, and finish. 1.5 Delivery, Storage, and Handling A. Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation. B. Store products on a flat and level surface. Adjust support blocks accordingly. C. For detailed storage recommendations: Trex Literature 1.6 Project Conditions A. Maintain environmental conditions, temperature, humidity, and ventilation within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
1.7
Warranty A.
Specific terms for warranties can be found at: Trex Literature
PART 2 Products 2.1
Manufacturers A. Acceptable Manufacturer: Trex Company Inc., 2500 Trex Way, Winchester, VA 22601: Trex Literature B. Substitutions: Not permitted. 2.2 Composite Cladding A. Design and Performance Requirements: 1. Fire-Surface Burning Characteristics per ASTM E84. 2. Code Compliance: a. International Building Code (IBC) - 2018 and 2021. b. International Residential Code (IBC) - 2018 and 2021. c. Florida Building Code (FBC) - 2023. Excluding high velocity hurricane zone, HVHZ. d. Intertek Research Report: No. CCRR-0325. Proof of code compliance. 1) Tested to ASTM D7032-14. 2) Tested to ASTM E330-14. 3) Tested to ASTM E84-16. 4) Tested to AC524 5) Tested to NDS-2018. 6) Tested to AISI S100-16
Made with FlippingBook - Share PDF online