Industrial Grey PVC-U Pipe And Fittings Flow
Rotor-X Paddlewheel Flow Sensor Type 515
PAAS Recommends the use of the Type 515 where no power is available.
Technical Information: Pressure Temperature Graph
Paddlewheel Flow Sensor Type 515
Specifications Non–Powered 0.3-6 m/s (1 to 20 ft/s) DN15-DN900 (1/2 to 36 in.)
PP 12.5 bar @ 20°C (180 psi @ 68° F) PVDF 14 bar @ 20 °C (203 psi @ 68° F) 19.7 Hz per m/s nominal (6 Hz per ft/s nominal)
Applications Chemical Production Liquid Delivery Systems
Pump Protection Filtration systems
Pure Water Production Not suitable for gases
Scrubber Systems Water Monitoring
Overview: Paddlewheel Flow Sensor Type 515
Simple to install with time-honoured reliable performance, Model 515 Rotor-X paddlewheel flow sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. The output signal of the Model 515 is a sinusoidal frequency capable of driving a self-powered flow meter (Model 5090). The wide dynamic flow range of 0.3 to 6 m/s (1 to 20 ft/s) allows the sensor to measure liquid flow rates in full pipes and can be used in low pressure systems. The Model 515 sensors are offered in a variety of materials for a wide range of pipe sizes and insertion configurations. The many material choices include PP and PVDF make this model highly versatile and chemically compatible to many liquid process solutions. Sensors can be installed in up to DN900 (36 in.) pipes using Signet’s comprehensive line of custom fittings. These custom fittings, which include tees, saddles, and weldolets, set the sensor to the proper insertion depth into the process flow. The sensors are also offered in configurations for wet-tap and intrinsically safe installation requirements.
190 PAAS Source Book
www.paas.com.au
V 4.1
Made with FlippingBook Digital Publishing Software