EZ-Glider Telescoping Arm Tool Positioning Options:
Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, different tool clamp needs to be ordered separately. Balancing Kit not included with torque arm.
Standard Tool Balancer needs to be mounted above an in- line tool.
P1
P2
P3
P4
Models
Item #
P1
P2
P3
P4
EZ-12T
260075
Yes
No
No
No
EZ-12T/1500 EZ-12T/2000
260115 260116 260076 260117 260118 260119
Yes Yes Yes Yes Yes Yes
No No
No No
No No
EZ-30T
Yes, Order Clamp #260144 Yes, Order Clamp #260144 Yes, Order Clamp #260144 Yes, Order Clamp #260144
Yes, Order Clamp #260145 Yes, Order Clamp #260145 Yes, Order Clamp #260145 Yes, Order Clamp #260145
Yes, Order Clamp #260146 Yes, Order Clamp #260146 Yes, Order Clamp #260146 Yes, Order Clamp #260146
EZ-30T/1500
EZ-30T/2000 EZ-30T/2500
EZ-Glider Telescoping Arm Accessories
Standard Gliding Rail System The Telescoping Torque Arms can be mounted to the Standard Gliding Rail System (sold separately) and can be used in a variety of positions. For a vertical position it is necessary to install one additional item, an interface bracket (sold separately).
Working Distance
Item #
450 mm 650 mm 850 mm 1050 mm 1350 mm 1850 mm
260103 260104 260105 260106 260107 260108
Balancing Kits for Vertical Mounting For EZ-12T, 30T models
A balancing kit can be mounted on the side of any telescoping arm. It allows the arm to be used with pistol grip tools and angle nutrunners (see tool position options above)
Interface Bracket Item # 260051
Interface Bracket
For a EZ-30T models mounted to the Standard Gliding Rail system.
Balancer Capacity
Item #
Stroke
260140 260141 260142 260143
2.2 - 4.4 lbs. 2.2 - 5.5 lbs. 4.4 - 8.8 lbs. 8.8 - 13.2 lbs.
63"
78.75" 78.75" 78.75"
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
Made with FlippingBook Annual report maker