Inverted Telescoping Torque Arm Tool Positioning Options:
The P2 tool poistion is standard clamp provided with EZ-70IT, EZ-120IT & EZ-200IT. For other tool clamp position options, sold separately.
*Must provide information (Brand & Model) on each tool being used with the arm. The clamp is custom made to fit the tool being used.
Models
Item #
P1
P3
P4
EZ-70IT/1500 EZ-70IT/2000 EZ-70IT/2500 EZ-120IT/1500 EZ-120IT/2000 EZ-120IT/2500 EZ-200IT/1500 EZ-200IT/2000 EZ-200IT/2500
260175 260176 260177 260178 260179 260180 260181 260182 260183
Clamp #260184 Clamp #260184 Clamp #260184 Clamp #260187 Clamp #260187 Clamp #260187 Clamp #260187 Clamp #260187 Clamp #260187
Clamp #260185 Clamp #260185 Clamp #260185 Clamp #260188 Clamp #260188 Clamp #260188
Clamp #260186 Clamp #260186 Clamp #260186 Clamp #260189 Clamp #260189 Clamp #260189
P3
P1
P4
P2
*On Request *On Request *On Request
*On Request *On Request *On Request
Inverted Telescoping Torque Arm Accessories
Standard Gliding Rail System The Inverted Telescoping Torque Arms can be mounted to the Standard Gliding Rail System (sold separately) and can be used in a variety of positions. For a vertical position it is necessary to install one additional item, an interface bracket (sold separately).
Working Distance
Item #
450 mm 650 mm 850 mm 1050 mm 1350 mm 1850 mm
260103 260104 260105 260106 260107 260108
Balancing Kits for Vertical Mounting For EZ-70IT, 120IT, & 200IT models A balancing kit can be mounted on the side of any inverted telescoping arm. It allows the arm to be used with pistol grip tools and angle nutrunners (see tool position options above)
Balancer Capacity
Item #
Stroke
260190 260191 260192
4.4 - 8.8 lbs. 8.8 - 13.2 lbs. 13.2 - 17.6 lbs.
78 3/4" 78 3/4" 78 3/4"
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
Made with FlippingBook Annual report maker