EZ-Glider Position Control Telescoping Torque Arm Tool Positioning Options:
Besides the standard in-line tool mounting position, the position control telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, different tool clamp needs to be ordered separately. Balancing Kit not included with torque arm.
Standard Tool Balancer needs to be mounted above an in- line tool.
P1
P2
P3
P4
Models
P1
P2
P3
P4
EZ-30T EZ-80T EZ-140T
Yes Yes Yes
Yes, Order Clamp #260144
Yes, Order Clamp #260145
Yes, Order Clamp #260146 Yes, Order Clamp #260148 Yes, Order Clamp #260148
Yes
Yes Yes
Yes
Accessories
Standard Gliding Rail System The Telescoping Torque Arms can be mounted to the Standard Gliding Rail System (sold separately) and can be used in a variety of positions. For a vertical position it is necessary to install one additional item, an interface bracket (sold separately).
Working Distance
Item #
450 mm 650 mm 850 mm 1050 mm 1350 mm 1850 mm
260103 260104 260105 260106 260107 260108
Balancing Kits for Vertical Mounting For EZ-30T, 80T and 140T models
A balancing kit can be mounted on the side of any telescoping arm. It allows the arm to be used with pistol grip tools and angle nutrunners (see tool position options above)
Interface Bracket Item # 260051
Interface Bracket
For a EZ-30T, 80T and 140T models mounted to the Standard Gliding Rail system.
Balancer Capacity
Item #
Stroke
260140 260141 260142 260143
2.2 - 4.4 lbs. 2.2 - 5.5 lbs. 4.4 - 8.8 lbs. 8.8 - 13.2 lbs.
63"
78.75" 78.75" 78.75"
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
Made with FlippingBook Annual report maker