ROUND TOP V-POINT (RFF) |--- 2.3” L ( 58.42 mm) ---| $24.00 each
USE WITH TOOL HOLDER
3/32” ROUND QC 004-853
USE WITH TOOL HOLDER
1/8” ROUND QC 004-873
STEPPED ROUND |--- 2” L ( 50.8 mm) ---|
30° 024-259
45° 024-260
60° 024-261
75° 024-262
90° 024-263
105° 024-264
120° 024-265
x 10 1.8 MM, 10 PACK 022-781 $105.00
1.8 MM 022-779 $11.75
TAPERED FLAT |--- 2.3” L ( 58.42 mm) ---| $24.00 each
USE WITH TOOL HOLDER
1/8” ROUND QC 004-873
#36, 0.2 MM 024-247
#37, 0.4 MM 024-248
#38, 0.6 MM 024-249
#39, 0.8 MM 024-250
#40, 1.0 MM 024-251
#41, 1.2 MM 024-252
#42, 1.4 MM 024-253
#43, 1.6 MM 024-254
#44, 1.8 MM 024-255
#45, 2.0 MM 024-256
V-POINT |--- 2.7” L (70 mm) ---| $26.00 each 60° 022-590 75° 022-591
TUNGSTEN CARBIDE
Much harder than any tool steel but more brittle. Sharpen with a diamond wheel.
3/32” Shank (2.35 mm)
USE WITH TOOL HOLDER
TRADITIONAL QC 004-803
105° 022-592
120° 022-593
BLANK, 1/8” 022-347 $10.25 ROUND SQUARE |--- 2.3” L ( 58.42 mm) ---| .083” square (2.1 mm) BLANK 002-232 $15.00
90° 002-233 $17.75
HIGH-SPEED STEEL
BLANKS |--- 2.5” L ( 63.5 mm) ---|
SQUARE .079” square (2 mm)
WIDE BLANK .125” square (3.2 mm)
GRS® X-7 BLANK |--- 2.5” L ( 63.5 mm) ---| .093” square (2.35 mm) Extremely hard (nearly Rockwell C70) Very wear resistant Applications include fine shading, bulino, and banknote engraving
BEVEL LINE GRAVER For bead raising and
022-340 $12.75
022-160 $16.25
material removal $23.00 each
SHAPED |--- 2.5” L ( 63.5 mm) ---| .079” square (2 mm)
002-702 #1 002-703 #2
90°
FLAT
022-350 $26.75
022-341 $14.00
022-342 $14.25
71
Made with FlippingBook Ebook Creator