LB2500F LOADING BENCH INSTRUCTIONS
0F LOADING BENCH OPERATING
Rev 1.0 (9/15/2025)
What's Included: Loading Bench and hardw Accessories sold separately: Mountz torque analyzer, BMX torque sensor and cable for
ware for mounting the BMX torque sensor. Mountz torque analyzer, BMX torque sensor and cable for BMX torque sensor. BMX torque sensor.
Reaction Position Horizontally: 4.87” to 77” from the center of the turn Vertically: 2.25” to 10” from the turn-table base Ratio (1:663)
” from the center of the turn-table table base
Mounting the LB2500F The LB2500F can be operated on a stable, level workbench. For the loading bench can be attached to the work table. To attach to a workbench, use 3/8" fasteners from the underside of the workbench and thread into the footpads. can be operated on a stable, level workbench. For additional security, the loading bench can be attached to the work table. To attach to a workbench, use 3/8"-16 fasteners from the underside of the workbench and thread into the thread inserts in the
Keep flush with bench edge
Torque Sensor Set-up Attach the BMX to the the rotating baseplate usin Attach the BMX to the the rotating baseplate using the correct hardware provided. Make sure the wrench is within the torque range of the BMX model. If the tool is under the torque range, then the accuracy may not be reliable. If the tool is over the torque range, then you may overtorque the BMX and damage the sensor.
Base Plate
Reaction Bars
Attach the sensor cable (sold separately) for connecting the BMX with a Mountz torque analyzer with an external sensor connection cable (sold separately) for connecting the BMX with a Mountz with an external sensor connection.
Once the BMX is connected with the torque analyzer, follow the instructions in the torque analyzer manual for accessing external the torque analyzer manual for accessing external transducers.
Hand Wheel
Using the Extension Arms The LB2500F can accommodate wrenches from 4.87" drive to center of handle). To extend the arm, pull the spring release button and pull out the extension bar to the desired length. The LB2500F can accommodate wrenches from 4.87" - 77" (measured center of
Extension Arms
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
1
Made with FlippingBook Annual report maker