OVERRUNNING APPLICATION REQUEST FORM This form is for the selection of BS Series. Please ll in this form for your selecion.
Date:
/
/
Name of contact:
Company name:
Tel:
Address :
Fax:
E-mail:
For Belt Conveyor Type of Equipment
Arrangement of the Overrruning Clutch
Motor:
1. Net weight of moving parts of the conveyor or width of belt:
kg mm
kW
Horsepower:
HP, at
r/m
2. Velocity of conveyor:
m/min
Shaft bore:
3. Max. possible load:
tons/hour
Maximum torque at clutch (excluding SF):
4. Total lift: Maximum Torque at Clutch
m
Clutch oparating time:
hours/day
_________________ pound/feet
5. Horizontal distance between head pulley and tail pulley: OR
m
Ambient Temp.:
HP / kW _________________ at _________________ RPM
Exposed to:
6. Modi cation coef cient for l = 49 m (normally used): Power Source
Dirt
Electric motor
Other (
)
Operating Condition
7. Shaft speed on which the clutch is mounted: Turbine (steam, gas, air)
r/m
Key size:
Inner race speed during overruning
_________________ RPM
Gasoline engine: number of cylinders: ____________
For Bucket Elevator 1.Total lift: Diesel engine:
Quantity required: Outer race speed during overruning
number of cylinders: ____________
_________________ RPM
2. Pitch circle dia. of head sprocket: Other (please explain in more detail) ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ m 3. Possible max load: tons/hour
If both members are rotating during overruning, are they rotating in the:
Electric motor
Power eource: Same direction
Diesel engine Opposite directions
Time Cycle of Clutch
Petrol engine _________________ minutes
Drive (engage)
4. Velocity of conveyor:
m/min
Other ( _________________ minutes
)
Overrun (free)
Load Application Smooth
For Motor Stall Torque Method 1. Motor name plate: Moderate
Shock
Rest
_________________ minutes
2. Shaft speed: Installation Condition Open, outside 3. Stall torque percentage: In the machine housing Runs in oil
Please provide layout if possible. Clutch operating time
_________________ hours per day
kW
Open, in a closed room
Environment Ambient temperature _________________ F° to _________________ F° Other (e.g. dust, wet, corrosive and other environmental influences that could be of significance)
r/min
Not accessible
%
Accessible for lubricating Type of Specification of Lubricant
110
Made with FlippingBook Digital Proposal Creator