HOW TO ORDER MGUS SERIES CAM CLUTCH
MGUS Series Cam Clutch products are designed to satisfy inner or outer race overrunning/general application requirements. Depending on application requirements, the MGUS Series can be used in overrunning, indexing, or backstopping applications. This series is offered in both metric and inch based inner race configurations. MGUS Series units can easily be mated to pulleys, gears, or sprockets.
Available Bore Range MGUS Series Cam Clutches are stocked in many bore sizes. Requested bore size and keyway combination are possible on a made-to-order basis. Chart below provides the available range of bore sizes per a given model.
Range Inner Diameter inch (mm)
Model
MGUS300 MGUS400 MGUS500 MGUS600 MGUS700 MGUS750 MGUS800 MGUS900 MGUS1000
0.500 to 0.750 inch 0.437 to 0.866 inch 0.750 to 1.312 inch 0.937 to 2.000 inch 1.875 to 2.938 inch 2.250 to 3.437 inch 2.625 to 4.438 inch 3.625 to 5.438 inch 4.938 to 7.000 inch
(12.70 to 19.05 mm) (11.10 to 22.23 mm) (19.05 to 33.32 mm) (23.80 to 50.80 mm) (47.62 to 74.61 mm) (57.15 to 87.30 mm) (66.68 to 112.71 mm) (92.08 to 138.11 mm) (125.41 to 177.80 mm)
Example How To Order Code: MGUS Series Cam Clutch MGUS 500 - 1B
The bore sizes listed below are standards. Special bore sizes are available upon request.
Specifications
Bore Size
Torque Capacity
Series
Frame Size
Bore Symbol
in.
(mm)
Bore Keyseat 1/8 x 1/16" 5 X 2.3 mm 3/16 x 3/32" 3/16 x 3/32" 1/8 x 1/16" 3/16 x 3/32" 6 x 2.8 mm 3/16 x 3/32" 3/16 x 1/16" 6 x 2.8 mm 3/16 x 3/32"
lb.ft
(Nm)
H 15
0.500 (12.70)
0.590
(15)
300
-
280
(380)
J L
0.625 (15.88) 0.750 (19.05) 0.500 (12.70) 0.625 (15.88)
H J 18 L P 20 P 1 1B
MGUS: For backstop and overrunning applications
0.708
(18)
400
-
398
(539)
0.750 (19.05) 0.875 (22.23)
0.787
(20)
0.875 (22.23) 1.000 (25.40) 1.125 (28.58)
1/4 x 1/8" 1/4 x 1/8"
1195
(1620)
500
-
32
Made with FlippingBook Digital Proposal Creator