MGUS SERIES CAM CLUTCH
H-M equally spaced on both sides
1 Inner race 2 Outer race 3 Cam cage assembly 4 Bearing 5 Spirolox 6 Oil seal 7 Lubrication filler plug
4 plugs for MGUS 300 to 700
3 plugs for MGUS 750 to 1300
Additional information including shaft and bore tolerances are found in the Engineering section starting on page 92.
Dimensions and Capacities
H-M No. of Tapped Holes (Qt.) Thread
Max. Overrunning (RPM)
Drag Torque
Oil Filler Plug Size × Pitch
A in. (mm)
B in. (mm)
C in. (mm)
D PCD in. (mm)
E in. (mm)
F in. (mm)
S in. (mm)
Oil oz. (mℓ)
Weight lb. (kg)
Inner Race
Outer Race
lb.ft. (Nm)
Model
0.17 2.500
3.000/2.998 (76.2/76.15) 3.500/3.498 (88.90/88.85) 4.250/4.248 (107.95/107.90)
2.380 2.625 0.409 1.122 0.512
0.9 (25) 1.0 (30) 1.7 (50) 2.7 (80) 4.6
4.0
MGUS300 2800
900
(4) 1/4-28 M6 x P1.0
(0.23)
(63.5)
(60.45)
(66.67)
(10.4)
(28.5)
(13)
(1.8)
0.21 2.750
2.690 2.875 0.421 1.248 0.630
6.0
MGUS400 2600
800
(4) 5/16-24 M6 x P1.0
(0.29)
(69.85)
(68.33)
(73.03)
(10.7)
(31.7)
(16)
(2.7) 11.0
0.38 3.500
3.375 3.625 0.484 1.748 0.630
MGUS500 2400
800
(4) 5/16-24 M6 x P1.0
(0.51)
(88.9)
(85.725)
(92.08)
(12.3)
(44.4)
(16)
(5)
0.63 3.750
5.375/5.373
3.630 4.750 0.503 2.748 0.630
19.0 (8.6) 43.0
MGUS600 2100
700
(6) 5/16-24 M6 x P1.0
(0.85)
(95.25)
(136.53/136.48)
(92.20)
(120.65)
(12.8)
(69.8)
(16)
1.25 5.000
7.125/7.123
4.880 6.250 0.780 3.996 0.787
MGUS700 1500
500
(8) 3/8-24 M6 x P1.0
(1.7)
(127)
(180.98/180.93)
(123.95) (158.75)
(19.8)
(101.5)
(20)
(135) 13.6 (400) 17.0 (500) 21.1 (620) 28.9 (850)
(19.5)
2.53 6.000
8.750/8.748
5.880 7.000 2.940 4.330 0.984
81.6 (37) 103
MGUS750* 1800
600
(8) 1/2-20 M8 x P1.25
(3.43)
(152.4)
(222.25/222.20) 10.000/9.998 (254.00/253.95)
(149.35)
(177.8)
(74.67)
(110)
(25)
3.98 6.000
5.880 8.940 2.940 5.512 0.984
MGUS800* 1300
475
(8) 1/2-20 M8 x P1.25
(5.39)
(152.4)
(149.35) (227.08)
(74.67)
(140)
(25)
(46.5)
4.99 6.380 12.000/11.997 6.250 9.750 3.125 6.693 1.260
155
MGUS900* 1200
400
(10) 5/8-18 M8 x P1.25
(6.77)
(162.052) (304.80/304.72)
(158.75) (247.65)
(79.38)
(170)
(32)
(70.5)
6.00 6.630 15.000/14.997 6.500 11.750 3.250 7.874 1.260
239
MGUS1000* 1200
325
(12) 5/8-18 M8 x P1.25
* When placing an order for MGUS Series Cam Clutch model MGUS750 and above, please inform TSUBAKI of the overrunning speed you use. (168.402) (381.00/380.92) (165.10) (298.45) (82.55) (200) (32) (8.14)
(108.5)
* When placing an order for MGUS Series Cam Clutch model MGUS750 and above, please inform Tsubaki of the overrunning speed you use.
www. ustsubaki .com
35
Made with FlippingBook Digital Proposal Creator