HOW TO ORDER TFS SERIES CAM CLUTCH
TFS Series Cam Clutch is a sprag type clutch designed for press fit installation. Sprag type designs typically have a higher torque capacity than a similarly sized ramp & roller type clutch. TFS has two vertical keyways on the outer race to assist with locating. Outside dimensions are the same as Series 63 ball bearings. This design is ideal for general inner or outer race overrunning applications. Since the TFS Series does not include an integral bearing, installing the TFS Cam Clutch next to a bearing which handles both the axial and radial loads is the typical application.
TFS Series Cam Clutch
Example How to Order Code: TFS Series Cam Clutch
TFS 25
Specifications
Torque Capacity
Series
Frame Size (Bore I.D.)
Bearing Series Inside Dia.
lb.ft. 13.3 20.7 36.9 62.0 94.4 148 350
(Nm)
12 15 17 20 25 30 35 40 45 50 60 70 80
6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6312 6314 6316
12 15 17 20 25 30 35 40 45 50 60 70 80
(18) (28) (50) (84)
(128) (200) (475) (607) (756)
TFS: Inner or outer race overrunning
448 558 829
(1124) (1975) (2514) (3924)
1457 1854 2894
TFS installation example
q r w y e
e - Shaft i - Key q - TFS Cam Clutch r - Housing t - Cover u - Snap ring shaft w - Bearing y - Snap ring
t u i
44
Made with FlippingBook Digital Proposal Creator