HOW TO ORDER
PBUS Series Cam Clutch is intended for use in general overrunning or indexing applications. The PBUS Series comes pre-lubricated with synthetic grease for easy installation and long service life. The outer race has provision for mounting gears, pulleys, and sprockets. Specify direction of rotation when ordering. Example How to Order Code: PBUS Series Cam Clutch PBUS SERIES CAM CLUTCH PBUS3-H-RH
Specifications
Bore Size
Torque Capacity
Keyseat in.
Series
Frame Size
Bore Symbol
Rotation
in.
(mm)
lb.ft
(Nm)
* * *
F
0.375 (9.53)
3
10 H H J 16 L 20 P 25 1 1B 30 1D 1F 1H 40 1J 1L 45
0.394 (10)
41.3 (56)
0.500 (12.70) 0.500 (12.70) 0.625 (15.88) 0.630 (16) 0.750 (19.05) 0.787 (20) 0.875 (22.23) 0.984 (25) 1.000 (25.40) 1.125 (28.58) 1.181 (30) 1.250 (31.75) 1.375 (34.93) 1.500 (38.10) 1.575 (40) 1.625 (41.28) 1.750 (44.45) 1.772 (45)
1/8 x 1/16" 3/16 x 3/32" 5 x 2.0 mm 3/16 x 3/32" 6 x 2.8 mm*
5
114 (155)
6
301 (410)
RH: Right hand rotation
1/4 x 1/8"
PBUS: General overrunning or indexing applications
8
-
-
8 x 3.8 mm*
454 (615)
LH: Left hand rotation
1/4 x 1/8"
5/16 x 5/32" 8 x 3.8 mm 5/16 x 5/32" 5/16 x 5/32" 3/8 x 3/16" 12 x 3.3 mm* 7/16 x 7/32" 7/16 x 7/32" 12 x 3.3 mm*
10
679 (920)
12
1365 (1850)
14
1623 (2200)
* PBUS3 is secured to the shaft by set screw.
Typical PBUS Series Installation
48
Made with FlippingBook Digital Proposal Creator