HOW OUR WASTE-TO-EN W OUR WASTE-TO-EN TO OVERCOME WASTE ISSUES IN INDIA, ElQuator has the solutions that will give double energy production just by burning it. Every waste-to-energy plants have a similar set-up in their design and equipment. It is a mass-burn facility. It starts with the waste brought in trucks and dump into the storage bunker. The trash scooped and transferred into the combustion area where it burned. During the incineration, the temperatures reach around 1000°C. With our efficient technology, the waste is combust directly in two chambers. Waste is added to the boiler in batches. The burning produced high temperatures in the furnace and steam. The heat from the furnace heats water in a boiler, creating steam that turns a turbine to drive a generator that makes electricity. The steam pressure then channeled to a turbine and generator to create electricity. Excess energy creates from incineration used as district heating and residences in the surrounding areas. With our technology that we invented to helps the developing countries managing their mountainous of solid waste that unattended for a long time, the power generates from the incinerator can be harvested twice. How do we do it? When the gases released to the environment at the end of the whole process, our technology will trap the gas and divert it to the reservoir tanks. With this method, we can harvest energy twice. It is CO2 free once energy it'd released to the consumers. The Compressed Air System will absorb all the gases released and store them in the tanks. Releasing it as in the form of electricity only takes a few seconds after the system received the signal. All are controlled by a computer system that manages the valves for the intake and sent out the energy. The waste-to-energy plants produce fly ash and bottom ash. The total amount of ash produced are from 15% to 25% by weight of the original quantity of waste.
Made with FlippingBook - professional solution for displaying marketing and sales documents online