Q5: How do I remove a bit from the bit holder?
A5: Because Loctite 609 provides a high-strength bond, removal requires force. Mountz recommends one of the following methods:
● Mechanical Force: Use a high-strength press (e.g., hydraulic press) to push the bit out. ● Heat + Force: Apply controlled heat to soften the Loctite and then use mechanical force to remove the bit.
Avoid using excessive side-loading or prying, which may damage the holder.
Q6: Are these bit holders compatible with other manufacturers’ bits?
A6: Yes. Mountz bit holders are designed to accept standard off-the-shelf ¼” and 4mm bits.
Q7: Can the preset torque value or bit be changed for a new fastening application?
A7: Yes. The bit holder can be repurposed with a new bit or recalibrated for a different torque setting. However, please note recalibration is required whenever the configuration changes.
Q8: When should I re-calibrate my tool?
A8: Recalibrate whenever:
● The bit is changed ● The torque setting is adjusted
● The tool experiences overload or impact ● Periodic calibration interval is reached
If torque performance falls outside the specified ±6% accuracy, the tool must be recalibrated or inspected.
Q9. What materials are the wrench heads made of?
A9: The bit holder is made from 17-4 PH stainless steel, ensuring exceptional strength and corrosion resistance. Please note this material specification is exclusive to the bit holder and does not apply to bits, unless specifically requested.
Q10: Are custom bit holder configurations available?
A10: Yes. Mountz offers custom bit holder solutions, including:
● Specialized head geometries ● Extended or reduced lengths ● Limited-access or application-specific designs
All custom configurations are evaluated on a case-by-case basis for feasibility, performance, and lead time. Please submit your request to Mountz Technical Support to begin the review process.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
2
Made with FlippingBook interactive PDF creator