Power-lock Trifold

Tsubaki POWER-LOCK® Keyless Shaft Locking Solutions

Performance Under Pressure

Tsubaki's extensive POWER-LOCK® portfolio oers a simple and cost eective solution to problems associated with keyed or machined drive shafts. Incorporating POWER-LOCK® technology into existing and new designs provides increased shaft strength while reducing machining and maintenance costs. Tsubaki's POWER-LOCK® elliminates backlash damage to keyways and specialty machined bores in applications that experience reversing loads or high torque. In addition, machining expenses associated with keyways, spline bores, steps and snap ring grooves can be removed from the equation. This easy to install device is ideal for locking large or small sprockets, gears, pulleys, timing cams, and rollers.

POWER-LOCK® Features & Benefits

• Broad range of product available in inch and metric shaft sizes sizes up to 11 ⁄(300mm). • Available in high grade carbon steel, stainless steel, and electroless nickel plating for maximum corrosion resistance. • Ideal for applications that experience directional reversing and impact loads. • Thrust load capability: Tsubaki POWER-LOCK® technology is designed to handle axial forces that would normally be detrimental to keyed and specialty machined bore sprockets, gears, and timing pulleys. • Easy assembly and disassembly allows for fast installation and removal. • Tsubaki POWER-LOCK® technology physically increases shaft strength and provides longer service life. • Costly machining is elliminated. The need for costly machining of keyways, specialty bores, and machining center set-up is not required. • Tsubaki POWER-LOCK® can be ordered in self centering , anged, or ush mounting congurations to save time and reduce dimensional envelope requirements. • The task of positioning a sprocket, gear, or pulley is simplied. • Several Tsubaki POWER-LOCK® Series’ come with built in tap holes for ease of removal. • Tsubaki POWER-LOCK® technology can be reused in applications that require frequent service or inspection.

Tsubaki POWER-LOCK® Prod

Multi-purpose

AS-SS Series ● Fully interchangeable with AS Series ● 100% stainless steel construction ● Available in inch and metric sizes from 3⁄4" (19mm) to 4" (150mm) ● Simple construction allows for easy installation ● Built in tap holes for easy removal ● Transmissible torque range from 151 ft. lbs. to 6,417 ft. lbs. RE-SS Series ● Available in flanged or flush type configuration ● Austenite stainless steel designed to handle the most corrosive environments and clean room applications ● Available in metric sizes from 5mm to 50mm ● Built in tap holes for easy removal ● Transmissible torque range from 4 ft. lbs. to 1,490 ft. lbs. SL Series ● External locking for hollow shaft applications ● Ideal for applications with limited space available ● Available in metric sizes from 24mm to 300mm ● Simple construction allows for easy installation and removal ● Transmissible torque range from 123 ft. lbs. to 213,893 ft. lbs. AS Series ● Global standard for keyless shaft locking ● Available in inch and metric sizes from 3⁄4" (19mm) to 11 11⁄16" (300mm) ● Simple construction allows for easy installation ● Built in tap holes for easy removal ● Transmissible torque range from 188 ft. lbs. to 111,400 ft. lbs.

Corrosion Resistant

Self Centering uct Selection Guide

AD Series ● Offers the greatest allowable transmissable torque of all Tsubaki POWER-LOCK® products ● Ideal for multi-strand or large hub sprockets & gears ● Available in inch and metric sizes from 3⁄4" (19mm) to 11 11⁄16" (300mm) ● Built in tap holes for easy removal ● Transmissible torque range from 283 ft. lbs. to 316,453 ft. lbs. KE Series ● Ideal for "A" style sprockets and narrow gears ● Available in inch and metric sizes from 3⁄8" (5mm) to 4" (150mm) ● Built in tap holes for easy removal ● Available with electroless nickel plating ● Transmissible torque range from 22 ft. lbs. to 7,460 ft. lbs. AE Series ● Ideal for narrow hubs, gears, and pulleys ● Flanged design allows for fast installation ● Interchangeable with AS Metric Series ● Available in inch and metric sizes from 3⁄4" (19mm) to 4" (150mm) ● Built in tap holes for easy removal ● Transmissible torque range from 195 ft. lbs. to 19,914 ft. lbs. TF Series ● Designed for small hub diameters ● Long taper of the inner ring allows for accurate shaft to hub alignment ● Available in metric sizes from 50mm to 90mm ● Built in tap holes for easy removal ● Transmissible torque range from 8 ft. lbs. to 6,505 ft. lbs. FL Series ● Designed for straight and narrow hubs ● Fully interchangeable with AS Series inch and metric ● Available in metric sizes from 3⁄4" (19mm) to 4" (100mm) ● Built in tap holes for easy removal ● Transmissible torque range from 201 ft. lbs. to 9,470 ft. lbs.

Tsubaki POWER-LOCK® Applications

The Tsubaki POWER-LOCK® is used in many applications throughout the world to satisfy the need for keyless shaft locking requirements. Our customers frequently discover new applications where a POWER-LOCK® provides an ideal alternative to expensive machining while improving performance and reducing maintenance costs. The following illustrations provide just a few examples of how a Tsubaki POWER-LOCK® may be applied.

AS Series used on a conveyor drive.

AD Series used on a mining conveyor drum.

AS Series used on an industrial drive.

AE Series used on a machine tool turret.

KE Series used on an industrial fan.

A World of Opportunity Kyotanabe City, Japan Manufacturing and research center ®

The most advanced chain

facility in the world

Our global presence means unprecedented • Develop and market advanced new products and technologies • Use intellectual assets from around the world

Corporate Headquarters U.S. Tsubaki Power Transmission, LLC. 301 E. Marquardt Drive

Roller Chain Division 821 Main Street Holyoke, MA 01040 Tel: (800) 323-7790

Conveyor and Construction Chain Division

Sprocket Manufacturing 1630 Drew Road Mississauga, Ontario L5S 1J6 Canada Tel: (800) 323-7790

Cable and Hose Carrier Division 7100 W. Marcia Road Milwaukee, WI 53223 Tel: (800) 443-4216 Fax: (413) 354-1900

1010 Edgewater Drive Sandusky, OH 44870 Tel: (800) 537-6140 Fax: (419) 626-5194

Wheeling, IL 60090 Tel: (800) 323-7790 Fax: (847) 459-9515 www.ustsubaki.com

06/12 L14005

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6

Made with FlippingBook Digital Proposal Creator