U.S. TSUBAKI ATTACHMENT CHAIN FOR SPECIALTY APPLICATIONS
Crossrod Conveyor Chain
Crossrod conveyor chain consists of two parallel strands of standard RS40 or RS50 chains, joined by crossrods on every link. RS40 chain is used for light loads such as conveying bread through coolers, wrappers and slicers. RS50 chain is for heavier loads. When sanitary, noncorrosive qualities are required, crossrods can be stainless steel. The connecting pins have milled flats and fit into a D-shaped hole in the link plate to prevent pin rotation and give longer life. Chains are furnished in five-foot sections and run on standard ASME/ANSI sprockets. Removable two-pitch link sections are available for repair. Ordering Information. Chains are available in carbon steel and stainless steel. Crossrods may be ordered in spring steel or stainless steel. One connecting pin is supplied with each chain section for connection. Additional pins may be ordered separately. Specify chain number and material combination desired. All sprockets should be ordered in pairs with key- ways in line to evenly distribute loads to both chains.
Two-Pitch Connecting Link
Crossroad Conveyor Chain Section
RS 40 Chain with .500 Pitch, .156” Pin Diameter Dimensions in inches
RS 50 Chain with .625 Pitch, .200” Pin Diameter Dimensions in inches
U.S. TSUBAKI
U.S. TSUBAKI
From
From
Plate to Pin Roller Plate Overall Head C.L. Width Riveted to End to C.L. A B C D
Plate to Pin Roller Plate Overall Head C.L. Width Riveted to End to C.L. A B C D
Average Weight
Average Weight
Chain Nominal Number Width
Chain Nominal Number Width
lbs./ft. P329-12 12 11.25 12.44 12.51 11.812 2.0 P329-15 15 14.25 15.44 15.51 14.812 2.6 P329-18 18 17.25 18.44 18.51 17.812 3.1 P329-21 21 20.25 21.44 21.51 20.812 3.4 P329-24 24 23.25 24.44 24.51 23.812 3.8 P329-30 30 29.25 30.44 30.51 29.812 4.7
lbs./ft. P800-12 12 11.10 12.60 12.67 11.812 2.2 P800-15 15 14.10 15.60 15.67 14.812 2.8 P800-18 18 17.10 18.60 18.67 17.812 3.3 P800-21 21 20.10 21.60 21.67 20.812 3.6 P800-24 24 23.10 24.60 24.67 23.812 4.1 P800-30 30 29.10 30.60 30.67 29.812 4.9
Single Cottered Connecting Pins Dimensions in inches
Two-Pitch Connecting Links Dimensions in inches
U.S. TSUBAKI
U.S. TSUBAKI
Chain
Nominal
Chain
Nominal
RS40 Width P329-CP12 P800-CP12 12 P329-CP15 P800-CP15 15 P329-CP18 P800-CP18 18 P329-CP21 P800-CP21 21 P329-CP24 P800-CP24 24 P329-CP30 P800-CP30 30 RS50
RS40 Width P329-RS12 P800-RS12 12 P329-RS15 P800-RS15 15 P329-RS18 P800-RS18 18 P329-RS21 P800-RS21 21 P329-RS24 P800-RS24 24 P329-RS30 P800-RS30 30 RS50
B-25
Made with FlippingBook Digital Proposal Creator