Live Tubular Roller Chain
RS 40 Chain with .500 Pitch, .750 ” Roller Diameter Dimensions in inches
This chain consists of two parallel strands of RS40 chain with 3/4 ” diameter live tubular rollers on 1 ” spacing. The chains can be placed at the end or any intermediate point of a line where variations in speed or stoppage of conveyed goods may occur. Placed next to slicing or wrapping machines, they act as accumulators. Each chain is assembled with connecting pins acting as tie bars every 12 ” . The pins have milled flats and fit into a D- shaped hole in the link plate to prevent pin rotation and give longer life. Chains are furnished in ten-foot sections. The tubular rollers rotate on either oil-impregnated iron or plastic bearings. Removable two-pitch connecting links are available. Ordering Information. Chains, connecting links and rollers are also available plated or in stainless steel. Either a plastic or an oil-impregnated bearing must also be specified. Chains and connecting links are ordered separately. One connecting pin is supplied with each chain section or connecting link. Additional pins may be ordered separately. Specify chain number and the material/bearing combination desired.
U.S. TSUBAKI
From
Plate to Pin Roller Plate Overall Head C.L. Width Riveted to End to C.L. A B C D
Average Weight
Chain Nominal Number Width
lbs./ft. TP329-12 12 11.25 12.44 12.51 11.812 4.3 TP329-15 15 14.25 15.44 15.51 14.812 5.3 TP329-18 18 17.25 18.44 18.51 17.812 6.2 TP329-21 21 20.25 21.44 21.51 20.812 7.2 TP329-24 24 23.25 24.44 24.51 23.812 7.6 TP329-30 30 29.25 30.44 30.51 29.812 9.1
Single Cottered Connecting Pins Dimensions in inches
Two-Pitch Connecting Links Dimensions in inches U.S. TSUBAKI
U.S. TSUBAKI
Chain
Nominal
Chain
Nominal
Number
Width
Number
Width
TP329-CP12 TP329-CP15 TP329-CP18 TP329-CP21 TP329-CP24 TP329-CP30
12 15 18 21 24 30
TP329-RS12 TP329-RS15 TP329-RS18 TP329-RS21 TP329-RS24 TP329-RS30
12 15 18 21 24 30
B-26
Made with FlippingBook Digital Proposal Creator