USING ATC CHAIN
2. Positions for Picking Up Tools
1. Guide Applications ■ SK and SK-W type Chains
The best position to pick up a tool is at the drive sprocket, especially in the case of SK type ATC chain.
3. Picking Up Tools with the Clamping Method
Installation of the guide rail
Clamping equipment is necessary for HP-T and HP type ATC chain.
■ HP-T Chains
4. Initial Chain Tension
Please apply initial tension up to 1/2 of the working load of the ATC chain and adjust the chain tension to avoid chain vibration.
Installation of the guide rail
5. Chain Tension and Driving Power
1) Please refer to table below:
Chain layout a) Horizontal
Chain tension
Driving power
Low
High
b) Inclined c) Vertical
Medium
Medium
High
Low
B-90
Made with FlippingBook Digital Proposal Creator