U.S. TSUBAKI ATC CHAIN
8. ATC Chain Lubrication
2) Tool layout and driving power:
Layout should be designed for optimal tool balance to reduce the driving power required and the chain tension.
Because precision is essential, lubrication is very important for ATC chain. Proper lubrication forms an oil film which reduces chain wear, chain friction, and noise. The chain lubrication should be maintained as follows: 1) Lubrication Points Lubrication should be applied and maintained between the chain link plates and the bearing area. Apply the lubricant manually or automatically using a drip lubrication system.
1. HP-T type ATC chain
6. Tool Weight and Chain Type
Please check: 1) Thrust load when picking up or setting tools into the pot. 2) Eccentric load due to overhang of the tools.
7. Tool Gripping Method
2. SK type ATC chain
2) Lubricant Selection General purpose oil is acceptable for lubrication, but the higher the quality the better. If the viscosity of the lubricant is too low, it will leak away and have to be replaced often and if the viscosity is too high, it will not reach the critical parts, and the lubrication will not be effective. The following lubricants are suggested: Lubrication oil: Mobil ® SAE #30 ~ 40 machine oil or equivalent. Frequency and amount of lubrication: Ensure that the bearing portion is always moist with lubricant. The amount of lubricant should be enough to ensure that lubricant reaches all critical points. If the tools are heavily used or the number of bending cycles of the chain is very high, increase the frequency of lubrication.
B-91
Made with FlippingBook Digital Proposal Creator