U.S. TSUBAKI CABLEVEYOR
Instructions for Handling and Ordering Cableveyor
TK Type is packed and shipped in pre-fixed lengths for convenience, secure packing and easy transportation. Assembly is easy and can be done quickly without special tools.
ASSEMBLY AND CHAIN CONNECTION
TK Type
Lay the outer side of the chain facing down.
Align the holes on both sides of the chain.
Insert the pin and lock in place with the retaining ring.
INSERTING THE CABLES AND HOSES
TK split supporter Take off the inner side of the supporter. If the supporter is difficult to remove, loosen the side bolts of the other supporter. Next, place the cables/hoses on the grooves. The inner supporter can then be put back and the supporter bolts loosely tightened. Do not firmly tighten the bolts until all the supporters have been reattached and the Cableveyor has been placed according to the photo for adjusting and final assembly. TK one-piece supporter The cables/hoses may be inserted from the moving or fixed end. After the cables or hoses have been inserted and the supporters replaced, tighten the supporter bolts completely. Be careful that the Cableveyor chain is not twisted. Tighten bolts evenly, keeping the Cableveyor straight. Check that the bolts have not come loose during handling and assembly.
B-105
Made with FlippingBook Digital Proposal Creator