U.S. TSUBAKI SUPER CHAIN
Super Series
❈
Pitch
Roller
Width
Link Plate
Pin
Transverse Average Maximum Approx.
U.S. TSUBAKI
Dia.
Between Roller Link
Pitch
Tensile Allowable Weight
Strength Load
lbs./ft.
Plates
lbs.
lbs.
P
R W T
H h
D L 1
L 2
C
Chain No.
SINGLE STRAND SUPER80 SUPER100 SUPER120 SUPER140 SUPER160 SUPER200 SUPER240 DOUBLE STRAND SUPER80-2 SUPER100-2 SUPER120-2 SUPER140-2 SUPER160-2 SUPER200-2 SUPER240-2 TRIPLE STRAND SUPER80-3
1.000 1.250 1.500 1.750 2.000 2.500 3.000 1.000 1.250 1.500 1.750 2.000 2.500 3.000 1.000 1.250 1.500 1.750 2.000 2.500 3.000
.625 .750 .875
.625 .750
.125 .156 .187 .219 .250 .312 .375 .125 .156 .187 .219 .250 .312 .375 .125 .156 .187 .219 .250 .312 .375
.949 1.185 1.425 1.661 1.898 2.374 2.850 .949 1.185 1.425 1.661 1.898 2.374 2.850 .949 1.185 1.425 1.661 1.898 2.374 2.850
.819 1.024 1.228 1.433 1.638 2.047 2.457 .819 1.024 1.228 1.433 1.638 2.047 2.457 .819 1.024 1.228 1.433 1.638 2.047 2.457
.312 .375 .437 .500 .562 .781 .937 .312 .375 .437 .500 .562 .781 .937 .312 .375 .437 .500 .562 .781 .937
.640 .778 .980
.758 .900
— — — — — — —
19,100 28,600 41,800 55,100 70,500 113,500 165,300 38,300 57,300 83,700 110,200 141,000 227,000 330,700 57,500 85,900 125,600 165,300 211,600 340,600 496,000
4,180 6,830 8,810
1.89 2.86 4.23 5.40 7.25
1.000 1.000 1.250 1.500 1.875
1.138 1.248 1.451 1.764 2.185 1.335 1.606 2.031 2.211 2.604 3.175 3.913 1.909 2.313 2.929 3.179 3.758 4.585 5.636
1.000 1.125 1.562 1.875
1.059 1.254 1.535 1.886 1.217 1.484 1.874 2.022 2.407 2.947 3.618 1.795 2.191 2.772 2.986 3.561 4.360 5.348
12,100 15,800 21,100 29,700 7,100 11,610 14,990 20,610 26,980 35,980 50,590 10,470 17,080 22,040 30,310 39,680 52,910 74,400
11.85 17.22
.625 .750 .875
.625 .750
1.153 1.408 1.789 1.924 2.305 2.817 3.458 1.153 1.408 1.789 1.924 2.305 2.817 3.458
3.78 5.63 8.36
1.000 1.000 1.250 1.500 1.875
1.000 1.125 1.562 1.875
10.70 14.40 23.46 34.19
.625 .750 .875
.625 .750
5.64 8.45
SUPER100-3 SUPER120-3 SUPER140-3 SUPER160-3 SUPER200-3 SUPER240-3
1.000 1.000 1.250 1.500 1.875
12.53 16.02 21.57 35.24 51.14
1.000 1.125 1.562 1.875
Note: 1. Offset links are not available.
2. Riveted type chain will be provided unless otherwise specified. 3. Press-fit connecting links will be supplied. 4. Carbon steel sprockets with hardened teeth should be used with Super Series chain. 5. Refer to page A-42, “Chain Drive Selection.” ❈
A-39
Made with FlippingBook Digital Proposal Creator