Indexing, Overrunn
Backstop Cam Clutch Products
BS
BS-F
BSEU
MZEU
BS Series is designed for lower speed conveyor applications. The unique non-rollover cam design provides higher torque capacity, assuring full engagement. Bore Range: 0.750” to 5.315” (20 to 135 mm) Torque Range: 217 to 11,580 lbs. ft.
BS-F Series is designed for simple, drop-in installations to all major competitive backstop products. Uses unique seal design for maximum life, minimal maintenance. Bore Range: 2.360” to 18.310” (60 to 465 mm) Torque Range: 4,980 to 722,000 lbs. ft. Competitor Models: Morse CB Falk NRT Marland MA Formsprag LLH
BSEU Cam Clutches are a European variation popular on many bucket elevators in North and South America. Bore Range: 0.787” to 3.543” (20 to 90 mm) Torque Range: 159 to 3,467 lbs. ft.
MZEU Series is designed for overruning applications. These units come pre-lubricated, and can be adapted with flanges and torque arms to suit a wide variety of applications. Bore Range: 0.472” to 5.906” (12 to 150 mm) Torque Range: 44 to 24,930 lbs. ft.
Competitor Models: Formsprag LLH Falk NRTH Ringspann FRH
Competitor Models: Formsprag GFR/GFRN Stieber GFR
Competitor Models: Formsprag RSBW
Morse CR/BW Stieber RSBW
BREU
BR-HT
CA
TFS
BREU Series is designed for backstop applications where bearing support and modular construction is desirable. Bore Range: 1.181” to 5.906” (30 to 150 mm) Torque Range: 447 to 25,009 lbs. ft.
BR-HT Series is designed for backstop applications where high-speed overrunning is required. Lift off cam design assures minimal heat generation and longest life. Bore Range: 0.787” to 5.118” (20 to 320 mm) Torque Range: 77 to 269,950 lbs. ft.
TFS Series has two vertical keyways on the outer race to assist with positioning. Outside dimensions are the same as series 63 ball bearings. Ideal for general overrunning applications. Bore Range: 0.472” to 3.150” (12 to 80 mm) Torque Range: 13 to 2,894 lbs. ft.
CA line of backstops are an integral part of the reducer. The unique non-rollover cam design is key and prevents damage to the gears, shafts and drive train. This is a drop-in replacement for Dodge® reducers. Bore Range: 0.738” to 1.750” (18.75 to 44.45 mm) Torque Range: 45 to 901 lbs. ft.
Competitor Models: Formsprag RIZ Stieber RIZ
Competitor Models: Formsprag RSCI Ringspann FXM
Competitor Models: Dodge 24 Series
Competitor Models: Formsprag ASNU Morse NFS Ringspann FC/FDN
Made with FlippingBook Digital Proposal Creator