ning and General Cam Clutch Products
MIUS
MZ
BB
TSS
MIUS Series is for mid-speed indexing applications up to 300 cycles a minute. Bore Range: 0.500” to 6.250” (12.7 to 160 mm) Torque Range: 280 to 27,290 lbs. ft.
MZ Series is designed for overrunning applications. These units come pre-lubricated for easy installation and long service life. Bore Range: 0.591” to 2.756” (15 to 70 mm) Torque Range: 137 to 2,242 lbs. ft.
BB Series has the bearing dimensions and characteristics of a 62 Series type ball bearing. This design provides easy installation and is ideal for general overrunning applications. Bore Range: 0.590” to 1.575” (15 to 40 mm) Torque Range: 21 to 192 lbs. ft.
TSS Series is designed for press fit installation. Outside dimensions are the same as series 62 ball bearings. Bore Range: 0.314” to 2.362” (8 to 60 mm) Torque Range: 4 to 479 lbs. ft.
Competitor Models: Formsprag AS Morse NSS Ringspann FCN
Competitor Models: Formsprag CSK Morse KK Ringspann ZZ Stieber KK
Competitor Models: Formsprag HPI Morse MI Marland RMS
Competitor Models: Stieber SMZ
MGUS/MGUS-R
BUS200
PBUS
OB-ON/OF & OB-SF
MGUS is suitable for applications which require low to high speed overrunning. MGUS-R series contains a built in oil reservoir and can be used for backstop applications. Bore Range: 0.500” to 6.250” (12.7 to 160 mm) Torque Range: 280 to 27,290 lbs. ft.
BUS Series is specifically designed for shaft mounting applications that require high speed inner race overunnning or low to mid speed outer race overrunning. Bore Range: 0.650” to 3.122” (16.5 to 79.3 mm) Torque Range: 39 to 1,025 lbs. ft.
PBUS Series clutch is packed with a special grease for general applications. The outer race has provisions for mounting gears, pulleys, and sprockets. Bore Range: 0.375” to 1.750” (10 to 45 mm) Torque Range: 41 to 1,623 lbs. ft.
OB-OB/OF Series is an enclosed unit housing cam clutch units and a common shaft. These units are used for high speed overrunning applications. OB-SF Series is an enclosed unit housing cam clutch units that allow for continuous high speed overrunning and engagement and high torque capacities. OB-ON/OF Torque Range: 231 to 4,337 lbs. ft. OB-SF Torque Range: 2,318 to 59,270 lbs. ft.
Competitor Models: Formsprag FS50 Morse B200 Renold SD
Competitor Models: Formsprag FSR Morse PB-A Renold SB
Competitor Models: Formsprag FSO Morse MG Ringspann FB
Made with FlippingBook Digital Proposal Creator