Tsubaki sprockets incorporate the finest materials, manufacturing, and quality processes to assure that each and every sprocket shipped will meet and exceed our customers’ expectations. Our broad range of Plain & Finished bore, Altered, and Made-to-Order sprockets are available for rapid delivery. Here are just a few reasons why Tsubaki sprockets are your best choice.
Why Tsubaki Sprockets are your best choice...
Feature #
Tsubaki Standard Sprocket Feature
Customer Benefit
All U.S. Tsubaki stock sprockets are made from 1045 cold rolled carbon steel. No powdered metal is used. All U.S. Tsubaki stock sprockets are hardened to RC35- 50 standard on ANSI 35-80 pitch sizes. All U.S. Tsubaki finished bore sprockets come standard with set screw placement directly over the keyway and at 90⁰ to ensure the sprocket maintains proper shaft position. All U.S. Tsubaki sprockets are bored, chamfered, and de-burred to ensure the proper fit.
100% 1045 carbon steel construction ensures durability and maximum service life. Hardened sprockets are more resistant to impact load failures and ensure long service life with minimal wear. Superior shaft clamp load and positioning reduces the possibility of galling and downtime associated with sprocket movement while in service. Customers can count on safely installing a sprocket that is finished to the correct size all the time, every time. Added corrosion resistance over the life of the sprocket.
❶
❷
❸
❹
All U.S. Tsubaki sprockets come standard with black oxide coating.
❺
❹
❺
❶
❷
❸
TSUBAKI INTERCHANGE CHART The following provides and interchange guide overview for plain bore, finished bore, Taper-Lock®, and QD® sprockets versus competitors that are commonly stocked. For detailed information regarding any U.S. Tsubaki sprocket product offering, please visit www.ustsubaki.com .
Competitor "A" Sprocket Model #
U.S. Tsubaki Sprocket Model #
Description
40B17
40B17
ANSI 40 Pitch, B Type Hub, 17 Teeth, Hardened
50BS14HTx1 1 / 8 "
50B14F-1B
ANSI 50 Pitch, B Type Hub, 14 Teeth, Finished 11 / 8 " Bore, Hardened
60A21
60A21
ANSI 60 Pitch, "A" Plate, 21 Teeth, Hardened
41BTB26
41BTL26
ANSI 41 Pitch, B Type Hub, Taper-Lock®, 26 Teeth, Hardened
80SK17H
80SK17
ANSI 80 Pitch, QD® Style Hub, 17 Teeth, Hardened
D40B23H
D40B23
Multi-Strand ANSI 40 Pitch, B Type Hub, Hardened
D50ATB20H
D50BTL20 Multi-Strand ANSI 50 Pitch, B Type Hub, Taper-Lock®, 20 Teeth Hardened
The following table should be used to define the hub bore size associated with "Finished Bore" stock sprocket product. Note that a letter designator is used to represent a fractional dimension. For example, a -1B hub bore equates to a sprocket hub inside diameter of 1.125". FRACTION LEGEND FOR HUB BORE SIZE Letter Designator Fractional Size Decimal Size A 1 / 16" 0.0625" B 1 / 8" 0.1250" C 3 / 16" 0.1875" D 1 / 4" 0.2500" E 5 / 16" 0.3125" F 3 / 8" 0.3750" G 7 / 16" 0.4375" H 1 / 2" 0.5000" I 9 / 16" 0.5625" J 5 / 8" 0.6250" K 11 / 16" 0.6875" L 3 / 4" 0.7500" M 13 / 16" 0.8125" P 7 / 8" 0.8750" R 15 / 16" 0.9375"
© 2012 U.S. Tsubaki Power Transmission, LLC All Rights Reserved. L14011
Page 1 Page 2Made with FlippingBook Digital Proposal Creator