Tsubaki ® : The choice for overload protection and safety
TL SERIES
Traditional machine protection. Friction-type construction. Slip-torque setting is done by simply tightening the adjusting nut or bolts. Competitively priced and easy to use.
SELECTION
Select based on torque required, rpm, and shaft diameter. Bushing Length selection should be equal to or shorter than width of center member (sprocket, etc.):
ROUGH STOCK BORE
TORQUE RANGE (LBS. - FT.) 0.7 ~ 1.5 2.2 ~ 7.2 5.0 ~ 15 2.2 ~ 5.0 5.0 ~ 20 10 ~ 40 7.0 ~ 15 15 ~ 55 25 ~ 110 15 ~ 36 35 ~ 155 65 ~ 310 36 ~ 87 85 ~ 420 165 ~ 800 289 ~ 940 435 ~ 1,370 651 ~ 1,960
MAXIMUM RPM
MAX. BORE W.STD. KW
WT (LBS.)
MODEL
BUSHING LENGTHS
D DH
L
S (MAX.)
TL200-1L TL200-1 TL200-2 TL250-1L TL250-1 TL250-2 TL350-1L TL350-1 TL350-2 TL500-1L TL500-1 TL500-2 TL700-1L TL700-1 TL700-2 TL10-16 TL10-24 TL14-10
1800
0.28
0.55
0.150, 0.236
2.0 0.95 1.14 0.276 0.44
0.177, 0.256
1800
0.39
0.88
2.5 1.38 1.88 0.354 1.32
1800
0.67
1.00
0.177, 0.256, 0.374 3.5 1.65 2.44 0.630 2.65
1800
0.78
1.75
0.256, 0.374
5.0 2.56 3.0 0.630 7.72
1800
1.18
2.63
0.374, 0.492
7.0 3.75 3.86 1.142 18.5
1000
1.18
2.84
0.492, 0.610, 0.768 10 3.94 4.53 0.945 46.3
500
1.57
3.94
0.610, 0.768, 0.925 14 5.71 5.91 1.142 115
TL14-15 1,446 ~ 2,890 TL20-6 1,807 ~ 3,615 TL20-12 3,400 ~ 6,870
500
1.97
5.12
0.610, 0.768, 0.925 20 7.28 6.89 1.22 258
TL200~TL350
TL500~TL700
TL10~TL20
More information at www.ustsubaki.com
13
Made with FlippingBook Digital Proposal Creator