No. 100
TAPER-LOCK ® SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
Chain Data Size
No. 100 TAPER-LOCK ® Sprockets
Dimensional Data TAPER-LOCK ® Sprockets
100
No. Teeth
Outside Diameter
Hub Diameter
Hub Type
Hub Style
Weight Lbs.
100 No.
Bushing #
LTB
MAX Bore *
Pitch
1 1/4"
Inside Width
3/4"
11 12 13 14 15 16 17 18 19 20 21 22 24 26 28 30 32 35 36 40
5.010 5.420 5.820 6.230 6.630 7.030 7.440 7.840 8.240 8.640 9.040 9.440
1615 1615 2012 2012 2517 2517 2517 2517 2517 2517 2517 2517 2517 2517 3020 3020 3020 3020 3020 3020
3.000 3.250 3.563 3.563 4.250 4.500 4.500 4.500 4.500 4.500 4.500 4.500 4.500 5.250 5.250 5.250 5.250 5.250 5.250 5.250
1.500 1.500 1.250 1.250 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 2.000 2.000 2.000 2.000 2.000 2.000
1.688 1.688 2.125 2.125 2.688 2.688 2.688 2.688 2.688 2.688 2.688 2.688 2.688 2.688 3.250 3.250 3.250 3.250 3.250 3.250
B B B B B B B B B B B B B B B B B B B B
S S S S S E E E E E E E E E E E E E E E
2.70 3.50 3.60 3.90 5.00 6.40 7.10 7.80 8.70 9.60
1 ¼ " Pitch: TAPER-LOCK ®
Roller Diameter
0.750" 0.692"
Nominal Tooth Width:
How to Order Code: Example Model # for 100 Pitch TAPER-LOCK ® Carbon Steel Sprockets
A 100 B TL 18
TAPER-LOCK ®
Altered !!
Chain Pitch in Inches
Hub Type
Number of Teeth
10.60 11.00 13.00 15.00 16.50 22.00 23.00 28.00 31.00 37.00
11 18 28 12 19 30 13 20 32 14 21 35 15 22 36 16 24 40 17 26
10.250 11.050 11.840 12.640 13.440 14.640 15.040 16.630
B: Hub Extension One Side
TAPER-LOCK ® hub with set screws
A: Alteration Required
100: 1¼" Pitch
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
* Please reference TAPER-LOCK ® bushing dimension table on page 190 for specific information on MAX Bore and keyway data.
SINGLE “TAPER-LOCK” STYLE
DOUBLE “TAPER-LOCK” STYLE
PLATE THICKNESS TOOTH (NOMINAL)
TOOTH (NOMINAL) .692˝ NOMINAL
TAPER-LOCK ® bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
TOOTH (NOMINAL) .692˝ NOMINAL
TAPER-LOCK ® Bushings
Bushing #
Bore Range
1615 2012 2517 3020
0.500 - 1.688" 0.500 - 2.125" 0.500 - 2.688" 0.875 - 3.250"
STYLES TYPEB LTB
STYLEE TYPEB LTB
LTB STYLES TYPEB
www. ustsubaki .com
114
115
TAPER-LOCK ® is a registered trademark of Rockwell Automation.
Made with FlippingBook Digital Proposal Creator