DRUM STYLE SPROCKETS
DRUM STYLE SPROCKETS
ENGINEERING CLASS
ENGINEERING CLASS SPROCKET QUOTATION DATA SHEET
Customer Name
Name/Surveyor
A
Single Drum Sprocket
B
Application Type
E
Site/Location
The Can is the main structural member of the drum assembly. Teeth are typically welded to the Can to provide positive traction, but traction wheel (toothless) style designs are also available.
C
Phone
Customer Name
D
Nomenclature / Part Number DR-480-1-10-A
DR
480
1
10
A
G
A plate style, otherwise full face is standard
Drum Assembly
Chain Number
# of Strands
# of Teeth
A
H
Double Drum Sprocket
Quantity
Number of Strands
Chain Size
Number of Hub Plates
B
Multi-strand drums are typically supplied with a Shroud. This allows for added strength and structural rigidity. Multi-strand drums without a Shroud are available upon request.
Number of Teeth
Number of Hubs
D
Bore
Mounting Type
C
L2
L1
B
Support Plates are utilized to provide additional structural rigidity and strength on triple strand drums and larger. A Teeth B Can C Hub Plate D Hub E Shaft F Shroud G Sprocket H Traction Wheel I Support Plate Triple Strand, Combination Sprocket & Traction Wheel
A
G
H
D
I
E
C
F
Length of Shroud
HUB STYLES
Length of Shaft
TYPE
BORE
BUSHING
1-7/16" to 3-15/16"
S1
STRAND 1
STRAND 2
STRAND 3
STRAND 4
STRAND 5
Single
Is it a Sprocket or Traction Wheel? # of Effective Teeth Length between Strands
4" to 4-15/16"
U1
5" to 5-15/16"
W1
L4=
NA
L1=
L2=
L3=
1-7/16" to 2-15/16"
XTB30
Length of Shroud
Length of Shaft
STYLE 1
STYLE 2
STYLE 3
Shaft Keyway Width
# of Keyways
3" to 3-7/16"
XTB35
Multi
Flange Diameter
Flange Length
Style 1 for bores up to 3-15/16”. Style 2 with double hub plates are required for bores greater than 4”. Split Taper bushings are standard for single style hubs.
For ease of installation XTB type bushings are suggested for double hub construction.
3-1/2" to 3-15/16"
XTB40
Bearings
YES / NO
4" to 4-7/16"
XTB45
Brand Preference Send inquiry to: ecdorders@ustsubaki.com
www. ustsubaki .com
186
187
Made with FlippingBook Digital Proposal Creator