No. 35
FINISHED BORE SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
Chain Data Size
Type “F” Bored to Shaft Size (includes standard keyway and two set screws)**
35
No.
No. 35 Finished Bore Sprocket Dia.
Pitch
3/8"
35B 24 F-1B 3/8" Pitch: FINISHED BORE How to Order Code: Example Model # for 35 Pitch Finished Bore Carbon Steel Sprockets 35 Inside Width Roller Diameter Nominal Tooth Width:
3/16" 0.200" 0.168"
No. Teeth
Outside Dia.
Pitch Dia. 1.097 1.214 1.331 1.449 1.567 1.685 1.804 1.922 2.041 2.160 2.278 2.397 2.516 2.635 2.754 2.873 2.992 3.111 3.230 3.349 3.588 3.826 4.184 4.303 4.780 5.018 5.376 5.734 6.449 7.165 8.358 8.597 9.552
Caliper Dia.
9
1.260 1.380 1.500 1.630 1.750 1.870 1.990 2.110 2.230 2.350 2.470 2.590 2.710 2.830 2.950 3.070 3.190 3.310 3.430 3.550 3.790 4.030 4.390 4.510 4.990 5.230 5.590 5.950 6.660 7.380 8.580 8.810 9.770
0.880 1.014 1.117 1.249 1.356 1.485 1.594 1.722 1.832 1.960 2.071 2.197 2.309 2.435 2.548 2.673 2.786 2.911 3.025 3.149 3.388 3.626 3.979 4.103 4.580 4.818 5.173 5.534 6.249 6.965 8.158 8.397 9.352 9.829
• • •
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 40 42 45 48 54 60 70 72 80 84 96
• • • • • • • • • • • • • • • •
• ¢ • ¢
• ¢ • ¢
• • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • •
• ¢ • ¢
Chain Pitch in Inches
Hub Type
Number of Teeth
Finished Bore
Hub Bore**
• • • • • • • • • • • • • • • • • • • • • • • • • • • •
9
18
27 28 30 32 35 36 40 42
48 54 60 70 72 80 84 96
F
3/8" (0.375") 1/2" (0.500") 5/8" (0.625") 3/4" (0.750") 7/8" (0.875")
10 19 11 20 12 21 13 22 14 23 15 24 16 25 17 26
H J L P 1
F: Hub Extension Machined with keyway and two set screws
B: Hub Extension One Side
35: 3/8" Pitch
1"
(1.000")
1B 1-1/8" (1.125") 1C 1-3/16" (1.188") 1D 1-1/4" (1.250")
45 112
• • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • •
** Hub bore size should be selected from dimensional table on the following page. Bore sizes that are not listed for a given number of sprocket teeth may be available per request as Altered.
TOOTH (NOMINAL) .168˝ NOMINAL
TOOTH (NOMINAL) .168˝ NOMINAL
10.250 11.680 13.590
10.029 11.461 13.371
11.261 13.171
STYLES TYPEB LTB
STYLEE TYPEB LTB
112
• Denotes stocking item ** Furnished without keyway ¢ Indicates set screw at 90 degrees and 180 degrees from keyway
www. ustsubaki .com
26
27
Made with FlippingBook Digital Proposal Creator