No. 35
TAPER-LOCK ® SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
Chain Data Size
No. 35 TAPER-LOCK ® Sprockets Dia.
Dimensional Data
35
No.
Outside Diameter
No. Teeth
Bushing #
MAX Bore*
LTB
Hub Diameter
Weight Lbs.
Pitch
3/8"
3/8" Pitch: TAPER-LOCK ® 35
Inside Width
3/16" 0.200" 0.168"
18 19 20 21 22 23 24 25 26 28 30 32
2.352 2.472 2.593 2.713 2.883 2.954 3.074 3.194 3.314 3.553 3.793 4.032
1008 1008 1008 1008 1210 1210 1210 1210 1610 1610 1610 1610
1.000 1.000 1.000 1.000 1.250 1.250 1.250 1.250 1.688 1.688 1.688 1.688
0.875 0.875 0.875 0.875 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000
1.875 ¨
0.40 0.50 0.60 0.70 0.80 0.90 0.90 1.20 1.10 1.20 1.20 1.30
Roller Diameter
1.813 1.938 2.063
Nominal Tooth Width:
How to Order Code: Example Model # for 35 Pitch TAPER-LOCK ® Carbon Steel Sprockets
2.375 ¨
2.438 2.438 2.438
A 35 B TL 18
2.875 ¨
2.875 3.125 3.250
Altered !!
Chain Pitch in Inches
Hub Type
Number of Teeth
TAPER-LOCK ®
18 21 24 26 30 19 22 25 28 32 20 23
A: Alteration Required
B: Hub Extension One Side
TAPER-LOCK ® hub with set screws
35: 3/8" Pitch
* Please reference TAPER-LOCK ® bushing dimension table on page 165 for specific information on MAX Bore and keyway data. ¨ Has recessed groove in hub for chain clearance
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
SINGLE “TAPER-LOCK” STYLE
DOUBLE “TAPER-LOCK” S
PLATE THICKNES TOOTH (NOMINA
TOOTH (NOMINAL) .168˝ NOMINAL
TOOTH (NOMINAL)
TAPER-LOCK ® bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
TAPER-LOCK ® Bushings
Bushing #
Bore Range
1008 1210 1610
0.500 - 1.000˝ 0.500 - 1.250˝ 0.500 - 1.688˝
STYLES TYPEB LTB
STYLEE TYPEB LTB
LTB STYLES TYPEB
www. ustsubaki .com
30
31
TAPER-LOCK ® is a registered trademark of Rockwell Automation.
Made with FlippingBook Digital Proposal Creator