No. 41
FINISHED BORE SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
Type “F” Bored to Shaft Size (includes standard keyway and two set screws)
No. 41 Finished Bore Sprocket Diameters
Chain Data Size
41
No.
Pitch
1/2" 1/4"
Hub Style
Wt. Lbs.
Caliper Diameter
No. Teeth
Outside Diameter
Pitch Diameter
41B36F- 1B 1/2" Pitch: FINISHED BORE How to Order Code: Example Model # for 41 Pitch Finished Bore Carbon Steel Sprockets 41 Inside Width Roller Diameter Nominal Tooth Width:
0.306" 0.227"
9
1.670 1.840 2.000 2.170 2.330 2.490 2.650 2.810 2.980 3.140 3.300 3.460 3.620 3.780 3.940 4.100 4.200 4.418 4.580 4.740 5.060 5.380 5.860 6.020 6.650 6.970 7.450 7.930 8.880 9.840
1.462 1.618 1.775 1.932 2.089 2.247 2.405 2.563 2.721 2.879 3.038 3.196 3.355 3.513 3.672 3.831 3.989 4.148 4.307 4.465 4.783 5.101 5.578 5.737 6.373 6.691 7.168 7.645 8.599 9.544
1.134 1.312 1.451 1.626 1.768 1.941 2.086 2.257 2.403 2.573 2.722 2.890 3.040 3.207 3.357 3.525 3.675 3.842 3.994 4.159 4.477 4.794 5.266 5.431 6.067 6.385 6.858 7.339 8.294 9.246
• • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • •
S 0.20 S 0.27 S 0.35 S 0.44 S 0.50 S 0.57 S 0.72 S 0.91 S 1.09 S 1.25 S 1.49 S 1.64
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 40 42 45 48 54 60 70 72 80 84 96
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Chain Pitch in Inches Hub Type
Number of Teeth
Finished Bore
Hub Bore **
9 19 30 70 10 20 32 72 11 21 35 80 12 22 36 94 13 23 40 96 14 24 42 112
H: J: L: 1:
1/2" 5/8" 3/4"
(0.500") (0.625") (0.750") (1.000") (1.125") (1.188") (1.250") (1.375") (1.437") (1.500")
E E E E E E E E E E E E E E E E E E E E
1.81 1.93 2.25 2.33 2.46 2.50 2.56 2.64 2.80 2.96 3.12 3.32 4.06 4.10 4.18 4.92 5.68 6.78 9.54 9.64
1"
F: Sprocket bore supplied with keyway and two set screws
B: Hub
1B: 1C: 1D:
1-1/8"
Extension One Side
41: 1/2" Pitch
1-3/16" 1-1/4" 1-3/8" 1-7/16" 1-1/2"
15 25 45 16 26 48 17 27 54 18 28 60
1F
1G: 1H:
** Hub bore size should be selected from dimensional table on the following page. Bore sizes that are not listed for a given number of sprocket teeth may be available per request as Altered.
• • • • • • • • • • • •
• • • • • • • • • • • •
• • • • • • • • • • • •
• • • • • • • • • • • •
• • • • • • • • • • • •
• • • • • • • • • • • •
TOOTH (NOMINAL) .227˝ NOMINAL
TOOTH (NOMINAL) .227˝ NOMINAL
11.430 11.750 13.030 13.660 15.570
11.145 11.463 12.736 13.372 15.282 17.827
10.840 11.156 12.430 13.067 14.976 17.522
E 11.54 E 12.20 E 14.86 E 19.16
112 18.120
STYLES TYPEB LTB
STYLEE TYPEB LTB
• Denotes stocking item ** Furnished without keyway
www. ustsubaki .com
36
37
Made with FlippingBook Digital Proposal Creator