No. 41
TAPER-LOCK ® SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
Chain Data Size
No. 41 TAPER-LOCK ® Sprockets Dia.
Dimensional Data
41
No.
No. Teeth Outside Dia.
Bushing #
MAX Bore*
LTB
Hub Diameter
Hub Style
Weight Lbs.
Pitch
1/2" 1/4"
A 41 B TL 18 1/2" Pitch: TAPER-LOCK ® How to Order Code: Example Model # for 41 Pitch TAPER-LOCK ® Carbon Steel Sprockets 41 Inside Width Roller Diameter Nominal Tooth Width:
14 15 16 17 18 19 20 21 22 23 24 25 26 28 30 32 35 36 40 45 48 54 60 70 72 80 96
2.490 2.650 2.810 2.970 3.140 3.300 3.460 3.620 3.780 3.940 4.100 4.200 4.420 4.740 5.060 5.380 5.860 6.020 6.650 7.450 7.930 8.880 9.840
1008 1008 1008 1210 1210 1210 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610
1.000 1.000 1.000 1.250 1.250 1.250 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688
0.875 0.875 0.875 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000
1.875 ¨
S S S S S S S S S S S S S E E E E E E E E E E E E E E
0.40 0.50 0.60 0.70 0.90 1.10 1.10 1.20 1.30 1.40 1.40 1.50 1.50 1.70 1.80 1.90 2.30 2.40 2.70 3.50 4.10 4.90 5.70 7.40 8.20 9.60
0.306" 0.227"
1.875 2.000
2.375 ¨
2.375 2.500
2.875 ¨ 3.000 ¨
3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000
Altered !!
Chain Pitch in Inches
Hub Type
Number of Teeth
TAPER-LOCK ®
14 20 26 40 72 15 21 28 45 80 16 22 30 48 96
A: Alteration Required
B: Hub Extension One Side
TAPER-LOCK ® hub with set screws
41: 1/2" Pitch
17 23 32 54 18 24 35 60 19 25 36 70
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
11.430 11.750 13.030 15.570
TAPER-LOCK ® bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
13.10
* Please reference TAPER-LOCK ® bushing dimension table on page 190 for specific information on MAX Bore and keyway data. ¨ Has recessed groove in hub for chain clearance
TAPER-LOCK ® Bushings
SINGLE “TAPER-LOCK” STYLE
DOUBLE “TAPER-LOCK” STYLE
Bushing #
Bore Range
PLATE THICKNESS TOOTH (NOMINAL)
TOOTH (NOMINAL) .227˝ NOMINAL
TOOTH (NOMINAL) .227˝ NOMINAL
1008 1210 1610
0.500 - 1.000" 0.500 - 1.250" 0.500 - 1.688"
STYLES TYPEB LTB
STYLEE TYPEB LTB
LTB STYLES TYPEB
www. ustsubaki .com
38
39
TAPER-LOCK ® is a registered trademark of Rockwell Automation.
Made with FlippingBook Digital Proposal Creator