No. 40
TAPER-LOCK ® SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
Chain Data Size
No. 40 TAPER-LOCK ® Sprockets Dia.
Dimensional Data TAPER-LOCK ® Sprockets
40
No.
Outside Diameter
Pitch
1/2"
No. Teeth
Bushing #
MAX Bore*
LTB
Hub Diameter
Hub Style
Weight Lbs.
Inside Width 1/2" Pitch: TAPER-LOCK ® How to Order Code: Example Model # for 40 Pitch TAPER-LOCK ® Carbon Steel Sprockets 40 Roller Diameter A 40 B TL 42 Nominal Tooth Width:
5/16"
14 15 16 17 18 19 20 21 22 23 24 25 26 28 30 32 35 36 40 42 45 48 54 60 70 72 80 84 96
2.491 2.652 2.814 2.975 3.135 3.296 3.457 3.617 3.778 3.938 4.098 4.258 4.418 4.738 5.057 5.377 5.855 6.015 6.653 6.970 7.450 7.928 8.885 9.841
1008 1008 1008 1210 1210 1210 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 1610 2012 2012 2012 2012 2012
1.000 1.000 1.000 1.250 1.250 1.250 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 1.688 2.125 2.125 2.125 2.125 2.125
0.875 0.875 0.875 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.250 1.250 1.250 1.250 1.250
1.813 ¨
S S S S S S S S S S S S S E E E E E E E E E E E E E E E E
0.30 0.40 0.50 0.50 0.60 0.70 0.70 0.80 0.90 1.00 1.40 1.50 1.70 1.80 1.90 1.90 2.30 2.40 2.80 2.90 3.50 4.00 4.90 6.00 8.20 9.00
0.312" 0.284"
1.813 1.938
2.375 ¨ 2.469 ¨
2.469
2.781 ¨
2.781 2.781 3.094 3.250 3.406 3.500 3.500 3.500 3.500 3.500 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.563 3.563 3.563 3.563 3.563
Altered !!
Chain Pitch in Inches
Hub Type
Number of Teeth
TAPER-LOCK ®
14 20 26 40 70 15 21 28 42 72 16 22 30 45 80 17 23 32 48 84 18 24 35 54 96 19 25 36 60
A: Alteration Required
B: Hub Extension One Side
TAPER-LOCK ® hub with set screws
40: 1/2" Pitch
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
SINGLE “TAPER-LOCK” STYLE
DOUBLE “TAPER-LOCK” STYLE
TAPER-LOCK ® bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188. TAPER-LOCK ® Bushings Bushing # Bore Range 1008 0.500 - 1.000" 1210 0.500 - 1.250" 1610 0.500 - 1.688" 2012 0.500 - 2.125"
PLATE THICKNESS TOOTH (NOMINAL)
TOOTH (NOMINAL) .284˝ NOMINAL
TOOTH (NOMINAL) .284˝ NOMINAL
11.434 11.752 13.026 13.663 15.573
10.80 11.30 14.60
* Please reference TAPER-LOCK ® bushing dimension table on page 190 for specific information on MAX Bore and keyway data. ¨ Has recessed groove in hub for chain clearance
STYLES TYPEB LTB
STYLEE TYPEB LTB
LTB STYLES TYPEB
www. ustsubaki .com
52
53
TAPER-LOCK ® is a registered trademark of Rockwell Automation.
Made with FlippingBook Digital Proposal Creator