No. 50
MULTI-STRAND TAPER-LOCK ® SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
No. 50 Multi-Strand TAPER-LOCK ® Sprocket Dia.
Dimensional Data Double Strand TAPER-LOCK ® Sprockets
Chain Data Size
50-2 5/8" 3/8"
No.
Pitch
No. Teeth
Outside Diameter
Hub Diameter
Hub Type
Hub Style
Weight Lbs.
Bushing #
MAX Bore *
LTB
5/8" Pitch: MULTI-STRAND TAPER-LOCK ® 50
Inside Width
14 15 16 17 18 19 20 21 25 30 36 42 48 52 60 84
3.110 3.320 3.520 3.720 3.920 4.120 4.320 4.520 5.320 6.320 7.520 8.720 9.910
1008 1210 1210 1610 1610 1610 2012 2012 2012 2517 2517 2517 2517 2517 2517 2517
1.000 1.250 1.250 1.688 1.688 1.688 2.125 2.125 2.125 2.688 2.688 2.688 2.688 2.688 2.688 2.688
0.875 1.000 1.000 1.000 1.000 1.000 1.250 1.250 1.250 1.750 1.750 1.750 1.750 1.750 1.750 1.750
N/A N/A N/A N/A N/A N/A
A A A A A A B B B B C C C C C C
S S S S S S S S S S S S S S S S
0.80 0.90 1.10 1.10 1.30 1.60 1.50 1.90 3.80 7.50 9.40
Roller Diameter
0.400" 0.332"
Nominal Tooth Width:
How to Order Code: Example Model # for 50 Pitch Multi-Strand TAPER-LOCK ® Carbon Steel Sprockets A D 50 C TL 42
3.250 3.500 4.281 5.281 4.250 4.250 4.250 4.375 4.375 4.375
Chain Pitch in Inches
Altered !!
Multi-Strand
Hub Type
TAPER-LOCK ®
Number of Teeth
13.40 18.60 22.20 30.30 45.30
A Style
A: No Hub
14 16 18 15 17 19
Extension
10.710 12.300 17.080
B Style
TAPER-LOCK ® hub with set screws
B: Hub Extension One Side
A: Alteration Required
D: Double Strand
50: 5/8" Pitch
20 25 21 30
* Please reference TAPER-LOCK ® bushing dimension table on page 190 for specific information on MAX Bore and keyway data.
C Style 36 48 60 84 42 52 60
C: Hub Extension Both Sides
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
TOOTH (NOMINAL) PLATE THICKNESS .332˝ NOMINAL PLATE THICKNESS 1.045˝
PLATE THICKNESS TOOTH (NOMINAL) .332˝ NOMINAL PLATE THICKNESS 1.045˝
TOOTH (NOMINAL) PLATE THICKNESS .332˝ NOMINAL PLATE THICKNESS 1.045˝
TAPER-LOCK ® bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
TAPER-LOCK ® Bushings
Bushing #
Bore Range
1008 1210 1610 2012 2517
0.500 - 1.000" 0.500 - 1.250" 0.500 - 1.688" 0.500 - 2.125" 0.500 - 2.688"
LTB
LTB
LTB
STYLES TYPEA
STYLES TYPEB
STYLES TYPEC
www. ustsubaki .com
70
71
TAPER-LOCK ® is a registered trademark of Rockwell Automation.
Made with FlippingBook Digital Proposal Creator