No. 60
DOUBLE SINGLE SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
No. 60 Double Single Sprocket Diameters
Chain Data Size
Dimensional Data: Double Single Sprockets
60
No.
Pitch
3/4" 1/2"
No. Teeth Outside Dia.
Plain Bore
LTB
C
D
MAX Bore *
Weight Lbs.
3/4" Pitch: DOUBLE SINGLE 60
Inside Width
13 14 15 16 17 18 19 20 21
3.490 3.740 3.980 4.220 4.460 4.700 4.950 5.190 5.430
0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750
1.938 1.938 1.938 1.938 1.938 1.938 1.938 1.938 1.938
1.484 1.484 1.484 1.484 1.484 1.484 1.484 1.484 1.484
2.344 2.563 2.875 3.047 3.250 3.500 3.703 3.953 4.188
1.500 1.750 1.875 2.000 2.250 2.375 2.500 2.750 2.875
2.60 3.20 3.80 4.50 5.30 6.50 6.80 7.00 7.50
Roller Diameter
0.469" 0.459"
Nominal Tooth Width:
How to Order Code: Example Model # for 60 Pitch Double Single Carbon Steel Sprockets
A DS 60 A 19
* Dimensions shown allow for standard keyway with set screw at 90 degrees
Altered !!
Multi
Chain Pitch in Inches
Hub Type
Number of Teeth
C
C
.459˝ NOMINAL
13 17 21 14 18 15 19 16 20
A: Alteration Required
DS: Double Single
A: No Hub
60: 3/4" Pitch
Extension
TAPER-LOCK ® DOUBLE SINGLE
STOCK BORE DOUBLE SINGLE
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 182.
ADS 60 ATL 24 How to Order Code: Example Model # for 60 Pitch Double Single TAPER-LOCK ® Carbon Steel Sprockets
LTB
LTB
All dimensions in inches unless noted.
No. 60 Double Single TAPER-LOCK ® Sprocket Diameters
Dimensional Data: Double Single TAPER-LOCK ® Sprockets
No. Teeth
Outside Dia.
Bushing #
LTB
C
D
MAX Bore *
Weight Lbs.
Altered !!
Multi
Chain Pitch in Inches Hub Type TAPER-LOCK ®
Number of Teeth
17 18 19 20 21 23 24
4.460 4.700 4.950 5.190 5.430 5.910 6.150
1615 2012 2012 2517 2517 2517 2517
1.938 1.938 1.938 1.938 1.938 1.938 1.938
1.484 1.484 1.484 1.484 1.484 1.484 1.484
3.218 3.469 3.703 3.953 4.188 4.672 4.906
1.688 2.125 2.125 2.688 2.688 2.688 2.688
4.50 5.00 5.80 5.60 6.40 7.30 8.20
17 21 18 23 19 24 20
TAPER-LOCK ® hub with set screws
A: Alteration Required
DS: Double Single
A: No Hub
60: 3/4˝ Pitch
Extension
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
C * Please reference TAPER-LOCK ® bushing dimension table on page 190 for specific information on MAX Bore and keyway data.
TAPER-LOCK ® bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
C
.459˝ NOMINAL
TAPER-LOCK ® Bushings
TAPER-LOCK ® DOUBLE SINGLE
STOCK BORE DOUBLE SINGLE
Bushing #
Bore Range
1615 2012 2517
0.500 - 1.688" 0.500 - 2.125" 0.500 - 2.688"
LTB
LTB
www. ustsubaki .com
82
83
TAPER-LOCK ® is a registered trademark of Rockwell Automation.
Made with FlippingBook Digital Proposal Creator