No. 60
MULTI-STRAND TAPER-LOCK ® SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
Double Strand No. 60 TAPER-LOCK ® Sprockets
Chain Data Size
Dimensional Data Multi-Strand TAPER-LOCK ® Sprockets
60-2 3/4" 1/2"
No.
No. Teeth
Outside Diameter
Hub Diameter
Hub Type
Hub Style
Weight Lbs.
Pitch
Bushing #
MAX Bore *
LTB
3/4" Pitch: MULTI-STRAND TAPER-LOCK ® 60
Inside Width
13 14 15 16 17 18 19 20 21 25 30 36 42 45 52 60
3.490 3.740 3.980 4.220 4.460 4.700 4.950 5.190 5.430 6.390 7.590 9.020
1215 1215 1615 1615 1615 2012 2012 2517 2517 2517 2517 2517 2517 2517 2517 2517
1.250 1.250 1.688 1.688 1.688 2.125 2.125 2.688 2.688 2.688 2.688 2.688 2.688 2.688 2.688 2.688
1.500 1.500 1.500 1.500 1.500 1.250 1.250 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750
2.250 2.500 2.813 3.000 3.250
B B B B B A A B B B B C C C C C
S S S S S S S S S S S S S S S S
1.20 1.60 1.30 2.20 2.50 3.00 3.50 4.00 5.00 7.50
Roller Diameter
0.469" 0.444"
Nominal Tooth Width:
How to Order Code: Example Model # for 60 Pitch Multi-Strand TAPER-LOCK ® Carbon Steel Sprockets A D 60 C TL 36
- -
3.688 4.188 5.156 6.344 4.250 4.250 4.250 4.250 4.250
Chain Pitch in Inches
Altered !!
Multi-Strand
Hub Type
TAPER-LOCK ®
Number of Teeth
13.50 17.50 25.50 29.50 41.00 55.30
A Style
10.460 11.180 12.850 14.760
A: No Hub
18 19
Extension
B Style 13 15 17 21 30 14 16 20 25
B: Hub Extension One Side
TAPER-LOCK ® hub with set screws
A: Alteration Required
D: Double Strand
60: 3/4" Pitch
* Please reference TAPER-LOCK ® bushing dimension table on page 190 for specific information on MAX Bore and keyway data.
C Style
C: Hub Extension Both Sides
36 45 60 42 52
TOOTH (NOMINAL) PLATE THICKNESS .444˝ NOMINAL PLATE THICKNESS 1.341˝
TOOTH (NOMINAL) PLATE THICKNESS .444˝ NOMINAL PLATE THICKNESS 1.341˝
PLATE THICKNESS TOOTH (NOMINAL) .444˝ NOMINAL PLATE THICKNESS 1.341˝
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
TAPER-LOCK ® bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
TAPER-LOCK ® Bushings
Bushing #
Bore Range
1215 1615 2012 2517
0.500 - 1.250" 0.500 - 1.688" 0.500 - 2.125" 0.500 - 2.688"
LTB
LTB
LTB
STYLES TYPEA
STYLES TYPEB
STYLES TYPEC
www. ustsubaki .com
86
87
TAPER-LOCK ® is a registered trademark of Rockwell Automation.
Made with FlippingBook Digital Proposal Creator